Aktuelle Publikationen

Gehe zu Literaturverzeichnis:

 


2017


Abduljawad, M., Samran, A., MSc, DMD, Kadour, J.-A., Karzoun, W., Kern, M.: Effect of fiber posts on the fracture resistance of maxillary central incisors with class III restorations. An in vitro study. J Prosthet Dent 118, 55-60 (2017).

Al-Akhali, M., Chaar, M.S., Kern, M.: Fracture resistance of ceramic and polymer-based occlusal veneer restorations. J Mech Behav Biomed 74, 245-250 (2017).

Ebeid, K., Wille, S., Salah, T., Wahsh, M., Zohdy, M., Kern, M.: Evaluation of surface treatments of monolithic zirconia in different sintering stages. J Prosthodont Res, in press (2017) published online 2017/10/17.

Elsayed, A., Wille, S., Al-Akhali, M., Kern, M.: Comparison of fracture strength and failure mode of different ceramic implant abutments. J Prosthet Dent 117, 499-506 (2017).

Elsayed, A., Wille, S., Al-Akhali, M., Kern, M.: Effect of fatigue loading on the fracture strength and failure mode of lithium disilicate and zirconia implant abutments. Clin Oral Implant Res in press  (2017).

Elsayed, A., Younes, F., Lehmann, F., Kern, M.: Tensile bond strength of so-called universal primers and multi-mode universal adhesives to zirconia and lithium disilicate ceramics. J Adhes Dent 19, 221-228 (2017).

Ghazal, M., Kern, M.: An in-vitro study of condylar displacement caused by interocclusal records: Influence of recording material, storage time and recording technique. J Prosthodont 26, 587-593 (2017).

Kern, J.S., Wolfart, S., Hilgers, R.D., Marre, B., Scheller, H., Strub, J., Böning, K., Hannak, W., Luthardt, R.G., Heydecke, G., Huppertz, J., Pospiech, P., Wöstmann, B., Stark, H., Mundt, T., Jahn, F., Kern, M., Edelhoff, D., Walter, M.H.: The randomized shortened dental arch study: influence of two different treatments on interdental spacing over 5 years. Clin Oral Investig 21, 1945-1951 2017.

Kern, M.: Adhäsivbrücken. Minimalinvasiv – ästhetisch – bewährt. 1. Auflage, Quintessenz Verlag, Berlin 2017.

Kern, M.: Evidenz- oder Eminenz-basierte Therapie – wie entscheiden Sie sich? Implantol 25, 123 (2017).

Kern, M.: Fifteen-year survival of anterior all-ceramic cantilever resin-bonded fixed dental prostheses. J Dent 56, 133-135 (2017).

Kern, M.: Invited commentary: Minimally invasive single-tooth replacement without implants - A true alternative? Int J Prosthodont 30, 417-418 (2017).

Kern, M.: RBFDPs. Resin-Bonded Fixed Dental Prostheses – Minimally invasive – esthetic – reliable. 1. edition, Quintessence, London 2017.

Kern, M.: Warum die Schneidezahn-Adhäsivbrücke einflügelig und in Deutschland Regelversorgung wurde. Quintessenz 68, 777–789 (2017).

Kern, M., Att, W., Fritzer, E., Kappel, S., Luthardt, R.G., Mundt, T., Reissmann, D.R., Radel, M., Stiesch, M., Wolfart, S., Passia, N.: Survival and complications of single dental implants in the edentulous mandible following immediate or delayed loading: A randomized controlled clinical trial. J Dent Res (2017) published online 2017/10/19.

Kern, M., Passia, N., Sasse, M., Yazigi, C.: Ten-year outcome of zirconia ceramic cantilever resin-bonded fixed dental prostheses and the influence of the reasons for missing incisors. J Dent 65, 51-55 (2017).

Kern, M., Thompson, V.P., Beuer, F., Frankenberger, R., Kohal, R.J., Kunzelmann, K.H., Mehl, A., Pospiech, P., Reiss, B.: All-Ceramics at a Glance. 3. Auflage. Arbeitsgemeinschaft für Keramik in der Zahnheilkunde e.V., Ettlingen 2017.

Krummel, A. Garling, A. Sasse, M., Kern, M.: Fracture resistance of occlusal ceramic veneers – influence of bonding methods. J Dent Res 96 (Spec Iss A), Abstr No #1990 (2017).

Libecki, W., Elsayed, A., Lehmann, F., Kern, M.: Efficacy of different surface treatments for intraoral repair of veneered zirconia frameworks. J Adhes Dent 19, 323-329 (2017).

Mehl, C., Kern, M., Zimmermann, A., Harder, S. Huth, S., Selhuber-Unkel, C.: Impact of cleaning procedures on adhesion of living cells to three abutment materials.  Int J Oral Maxillofac Implant 32, 976-984 (2017)

Mourshed, B., Samran, A., Alfagih, A., Abdulrab, S., Kern, M.: Anterior cantilever resin-bonded fixed dental prostheses. A review of the literature. J Prosthodont, published online 4. November, 2016.

Mundt, T., Passia, N., Att, W., Heydecke, G., Freitag-Wolf, S., Luthardt, R.G., Kappel, S., Konstantinidis, I.K., Stiesch, M., Wolfart, S., Kern, M.: Pain and discomfort following immediate and delayed loading by overdentures in the single mandibular implant study (SMIS).Clin Oral Investig 21, 635-642 (2017).

Passia, N., Abou-Ayash, S., Bender, D., Fritzer, E., Graf, M., Kappel, S., Konstantinidis, I., Mundt, T., Frfr. v. Maltzahn N, Wolfart, S., Kern, M.: Single mandibular implant study (SMIS) – recruitment considerations. Int J Prosthodont 30, 43-46 (2017).

Passia, N., Abou-Ayash, S., Reismann, D.R., Fritzer, E., Kappel, S., Konstantinidis, I., v. Koenigsmarck, V., Mundt, T., Stiesch, M., Wolfart, S., Ali, S., Kern, M.: Single mandibular implant study (SMIS) - masticatory performance - results from a randomized clinical trial using two different loading protocols. J Dent 65, 64-69 (2017).

Passia, N., Att, W., Freitag-Wolf, S., Heydecke, G., V, V.K., Frfr, V.M.N., Mundt, T., Rädel, M., Schwindling, F.S., Wolfart, S., Kern, M.: Single mandibular implant study (SMIS) - denture satisfaction in the elderly. J Oral Rehabil 44, 213-219 (2017).

Sieper, K., Wille, S., Kern, M.: Fracture strength of lithium disilicate crowns compared to polymer infiltrated ceramic network and zirconia reinforced lithium silicate crowns. J Mech Behav Biomed Mater 74, 342-248 (2017). 

Walter, M.H., Dreyhaupt, J., Hannak, W., Wolfart, S., Luthardt, R.G ., Stark, H., Pospiech, P., Mundt, T., Kern, M., Wöstmann, B., Scheller, H., Marré, B., Heydecke, G .: The randomized shortened dental arch study: tooth loss over ten years. Int J Prosthodont, in press  (2017).

Wille, S., Lehmann, F., Kern, M.: Durability of resin bonding to lithium disilicate and zirconia ceramic using a self-etching primer. J Adhes Dent accepted Oct 3, 2017.

Wille, S., Zumstrull, P. Kaidas, V., Jessen, L.K., Kern, M.: Low temperature degradation of single layers of multilayered zirconia in comparison to conventional unshaded zirconia: phase transformation and flexural strength. J Mech Behav Biomed Mater 77, 171-175 (2017).

Yazigi, C., Chaar, M.S.., Schneider, H., Rüger, C. Haak, R., Kern, M.: Effects of artificial aging on occlusal veneers using SD-OCT technology. J Dent Res 96 (Spec Iss A), Abstr No #0672 (2017).

Zurück zum Anfang


2016


Abduljawad, M., Samran, A., Kadour, J., Al-Afandi, M., Ghazal, M., Kern, M.: Effect of fiber posts on the fracture resistance of endodontically treated anterior teeth with cervical cavities: An in vitro study. J Prosthet Dent 116, 80-84 (2016).

Al-Akhali, M., Chaar, M.S., Kern, M.: Influence of adhesive-technique on fracture strength of glass-ceramic occlusal veneers. J Dent Res 95, Abstr No 0781 (2016).

Baumann, E., Wiltfang, J., Koller, M., Wenz, H.-J., Möller, B., Hertrampf, K.: Challenges of early detection of oral cancer: Raising awareness as a first step to succesful campaigning. Health Edu Res 31, 136-145 (2016)

Birkenfeld, F., Behrens, E., Florke, C., Rohnen, M., Wieker, H., Kern, M., Lucius, R., Wiltfang, J.: Mechanical resistance of the periorbita and the orbital floor complex-are isolated orbital floor fractures only a soft tissue problem? Int J Oral Maxillofac Surg 45, 279-283 (2016).

Chaar, M.S., Kern, M., Al-Akhali, M.: Fracture resistance of occlusal veneers made from PMMA or polymer-infiltrated ceramic. J Dent Res 95, Abstr No 1750 (2016).

Ebeid, K., Wille, S., Salah, T., Wahsh, M., Zohdy, M., Kern, M.: Evaluation of surface treatments of zirconia in different sintering stages. J Dent Res 95, Abstr No 0242 (2016).

Elsayed, A., Wille, S., Kern, M.: Comparison between the fracture strength of lithium disilicate, zirconia and titanium abutments. J Dent Res 95, Abstr No 1521 (2016).

Foad, A., Morsi, T., Aboelfadl, A., Kern, M.: Evaluation of novel primer for CAD/CAM ceramics and Its durability. J Dent Res 95, Abstr No 0286 (2016).

Hallmann, L., Ulmer, P., Lehmann, F., Wille, S., Polonskyi, O., Johhanes, M., Koebel, S., Trottenberg, T., Bornholdt, S., Haase, F., Kersten, H., Kern, M.: Effect of surface modifications on the bond strength between zirconia ceramic and cement resin. Dent Mater 32, 631-639 (2016).

Hallmann, L., Ulmer, P., Wille, S., Polonskyi, O., Lehmann, F., Koebel, S., Trottenberg, T., Bornholdt, S., Haase, F., Kersten, H., Kern, M.: Effect of surface treatments on properties and morphological change of dental zirconia. J Prosthet Dent 115, 341-349 (2016).

Kern, M.: Adhäsivbrücken als Alternative zu Einzelzahnimplantaten im Frontzahnbereich – Lebensalter als ein Kriterium. Implantol 24, 389–398 (2016).

Kern, M.: Can we bond to zirconia? BioMatériaux Cliniques 1, 70-71 (2016).

Kern, M.: Implantate als Regelversorgung für Zahnlose? Implantologie 24, 127 (2016).

Kern, M., Passia, N.: Ten-year outcome of posterior zirconia ceramic fixed dental prostheses. J Dent Res 95, Abstr No 1449 (2016).

Klosa, K., Meyer, G., Kern, M.: Clinically used adhesive ceramic bonding methods: A survey in 2007, 2011 and in 2015. Clin Oral Invest 20, 1691-1698 (2016).

Libecki, W., Elsayed, A., Kern, M.: Reducing the effect of polymerization shrinkage of temporary fixed dental prostheses by using different materials and fabrication techniques. Dent Mater 32, 1464-1471 (2016).

Mehl, C.,  Ali, S., El Bahra, S., Harder, S., Vollrath, O., Kern, M.: Is there a correlation between tensile strength and retrievability of cemented implant-retained crowns using artificial ageing? Int J Prosthodont 29, 83-90 (2016).

Mehl, C., Gaßling, V., Schultz-Langerhans, S., Açil, Y., Bähr, T., Kern, M.: Influence of four different abutment materials and the adhesive joint of two-piece abutments on the cervical implant bone and soft tissue. Int J Oral Maxillofac Implant 31, 1264-1272 (2016).

Mehl, C., Kern, M., Meinke, N., Acil, Y., Bahr, T., Wiltfang, J., Gassling, V.: Can one-wall bone defects be augmented with xenogenic bone grafting material alone? J Craniomaxillofac Surg 44, 1137-1142 (2016).

Mehl, C., Kern, M., Schütte, A.-M., Laith F. Kadem, L.F., Selhuber-Unkel, C.: Adhesion of living cells to abutment materials, dentin, and adhesive luting cement with different surface qualities. Dent Mater 32, 1524-1535 (2016).

Mehl, C.M., Okano, N., Ludwig, K., Kern, M.: Retention and weld stability of titanium copings fixed to implant abutments. J Prosthet Dent 115:26-34 (2016).

Meyer, G., Kern, M.: Dentinwundversorgung nach Kronenpräparation. Quintessenz 67, 825-828 (2016).

Meyer, G., Kern, M.: The effectiveness of plasma cleaning on stainless steel. J Dent Res 95, Abstr No 0401 (2016).

Meyer, G., Kern, M.: Vollkeramische Kronen und Brücken. S3-Leitline. Quintessenz Zahntech 42, 73-82 (2016).

Passia, N., Att, W., Freitag-Wolf, S., Heydecke, G., von Königsmarck, V., von Maltzahn, N., Mundt, T., Raedel, M., Schwindling, S., Wolfart, S., Kern, M.: Single dental implant in the edentulous mandible – patients' denture satisfaction. J Dent Res 95, Abstr No 1449 (2016).

Passia, N., Ghazal, M., Kern, M.: Long-term retention behaviour of resin matrix attachment systems for overdentures. J Mechanic Behav Biomed Mater 57, 88-94 (2016).

Passia, N., Kern, M.: Prothetische Versorgungskonzepte für das reduzierte Lückengebiss andeutschen Hochschulen. Quintessenz 67, 167-175 (2016).

Passia, N., Mitsias, M., Lehmann, F., Kern, M.: Bond strength of a new generation of universal bonding systems to zirconia ceramic. J Mech Behav Biomed Mater 62, 268-274 (2016).

Samran, A., Abduljawad, M, Kadour, J.-A., Ghazal, M., Alafandi, M., Kern, M.: Effect of fiber posts on the fracture resistance of endodontically treated anterior teeth with cervical cavities. An in vitro study. J Prosthet Dent 116, 80-84 (2016).

Sieper, K., Wille, S., Kern, M.: Fracture strength of crowns made from current CAD/CAM materials. J Dent Res 95, Abstr No 1749 (2016).

Wille, S., Haidarschin, G., Hölken, I., Adelung, R., Kern, M.: Biaxial flexural strength of new Bis-GMA/TEGDMA based composites with different fillers for dental applications. Dent Mater 32, 1073-1078 (2016).

Wille, S., Sieper, K., Kern, M.: Wear resistance of crowns made from current CAD/CAM materials. J Dent Res 95, Abstr No 0108 (2016).

Wolfart, S. Wolf , K., Brunzel, S., Wolfart, M., Caliebe, A., Kern, M.: Implant placement under existing removable dental prostheses and its effect on masticatory performance. Clin Oral Investig 20, 2447-2455 (2016).

Zurück zum Anfang


2015


Beck-Broichsitter, B.E., Garling, A., Koehne, T., Barvencik, F., Smeets, R., Mehl, C. et al.: 3D-tracking the regenerative potential of the mandible with micro-CTs. Oral Maxillofac Surg. 19:29-35 (2015).

Birkenfeld, F., Becker, M.E., Sasse, M., Gassling, V., Lucius, R., Wiltfang, J., Kern, M.: Detection of the genial spinal canal in atrophic mandibles with a cone beam computed tomography: a cadaver study. Dento Maxillo Facial Radiol 44, 20140290 (2015).

Birkenfeld, F., Behrens, E., Kern, M., Lucius, R., Wiltfang, J.: Mechanical properties of collagen membranes modified with pores - Are they sufficient for orbital floor reconstruction? Brit J Oral Max Surg 53, 957-662 (2015).

Birkenfeld, F., Behrens, E., Kern, M., Gassling, V., Wiltfang, J.: Mechanical properties of collagen membranes: Are they sufficient for orbital floor reconstructions? J Craniomaxillofac Surg 43, 260-263 (2015).

Chaar, M.S., Kern, M.: Ten-year clinical outcome of posterior metal-ceramic crowns fabricated with laser-sintering technology. J Dent Res 94, Abstr No 3699 (2015).

Chaar, M.S., Kern, M.: Five-year clinical outcome of posterior zirconia ceramic inlay-retained FDPs with a modified design. J Dent 43, 1411-1415 (2015).

Chaar, M.S., Passia, N., Kern, M.: All-ceramic inlay-retained fixed dental prostheses: An update. Quintessence Int 46, 781-788 (2015).

Chaar, M.S., Passia, N., Kern, M.: Ten-year clinical outcome of three-unit posterior FDPs made from a glass-infiltrated zirconia reinforced alumina ceramic (In-Ceram Zirconia). J Dent 43, 512-517 (2015).

Chaar, M.S., Passia, N., Kern, M.: Vollkeramische Inlaybrücken – Ein Update. Quintessenz 66, 655–663 (2015).

Harder, S., Kern, M.: Klinische Einflussgrößen auf den Erfolg von Verschraubungen in der Implantatprothetik. Implantol 23, 151-157 (2015).

Hertrampf, K., Eisemann, N., Wiltfang, J., Pritzkuleit, R., Wenz, H.-J., Waldmann, A.: Baseline data of oral and pharyngeal cancer before introducing an oral cancer prevention campaign in Germany. J Craniomaxillofac Surg 43, 360-366 (2015)

Karzoun, W., Abdulkarim, A., Samran, A., Kern, M.: Fracture strength of endodontically treated maxillary premolars supported by a horizontal glass fiber post. An in vitro study. J Endod 41, 907-912 (2015).

Kern, M.: Bonding to oxide ceramics - Laboratory testing versus clinical outcome. Dent Mater 31, 8-14 (2015).

Kern, M.: Comments regarding Pieger S, Salman A, Bidra AS. Clinical outcomes of lithium disilicate single crowns and partial fixed dental prostheses: A systematic review. J Prosthet Dent 2014;112:22-30. J Prosthet Dent 113, 259 (2015).

Kern, M.: Einflügelige Adhäsivbrücken. Zahnärztl Welt 124, 45-46 (2015).

Kern, M.: On the scientific evidence that the sterilisation of customised implant abutments is required. Eur J Oral Implantol 8:111 (2015).

Kern, M.: Rezension zu: Prücklmaier, L.: Die digitale Abformung bis zum fertigen Zahnersatz. Angenehm  - präzise - fehlerfrei. Spitta Verlag, Balingen 2014. Zahnärztl Mitt 105, 901 (2015).

Kern, M.: Wie halten Sie es mit der wissenschaftlichen Evidenz? ZWL Zahntechnik Wirtschaft Labor 4, 3 (2015).

Kern, M.: Zur wissenschaftliche Evidenz, dass die Sterilisation von Implantat-Abutments erforderlich ist. Quintessenz Zahntech 41, 1581-1582 (2015).

Kern, M., Ahlers, O.: Controlled preparation depth for ceramic veneers using a color marking in the depth grooves. J Prosthet Dent 114, 862-864 (2015).

Kern, M., Beuer, F., Frankenberger, R., Kohal, R.J., Kunzelmann, K.H., Mehl, A., Pospiech, P., Reiss, B.: Vollkeramik auf einen Blick. 6. Auflage. Arbeitsgemeinschaft für Keramik in der Zahnheilkunde e.V., Ettlingen 2015.

Mehl, C.J., Kern, M.: Behandler und Patienten empfinden vieles anders. Studie zur Beurteilung dentaler Ästhetik. Zahnärztl Mitt 105, 2796-2798 (2015).

Mehl, C., Lin, J., Harder, S., Vollrath, O., Kern, M.: Perception of dental esthetics - influence of restoration type, symmetry and color in four different countries. Int J Prosthodont 28, 60-64 (2015).

Mehl, C., Harder, S., Wolfart, S., Vollrath, O., Trinkler, A., Wenz, H.-J., Kern, M.: Influence of dental education on esthetic perception. Int J Esthet Dent 10, 486-499 (2015).

Mehl, C.J., Kern, M.: Retention von festsitzenden Restaurationen auf Implantaten. Welcher Zement für welche Indikation? Implantol 23, 175-185 (2015).

Mehl, C., Steiner, M., Ludwig, K., Kern, M.: Wear, mikroleakage and plastic deformation of an implant-supported chair-side bar system. J Adv Prosthodont 7, 323-328 (2015).

Meyer, G., Ahsbahs, S., Kern, M.: S3- Leitline „Vollkeramische Kronen und Brücken“. Deutsche Zahnärztliche Zeitschrift 2015;70:123-132.

Meyer, G., Kern, M.: Kronen und Brücken aus Vollkeramik – S3-Leitlinie verabschiedet. Zahnärztl Mitt 105, 740-745 (2015).

Mews, L., Kern, M., Ciesielski, R., Fischer-Brandies, H., Koos, B.: Shear bond strength of orthodontic brackets to enamel after application of a caries infiltrant. Angle Orthodont, 85,645-650 (2015).

Passia, N., Chaar, S., Kern, M.: Die Sofortbelastung im Zahnlosen Unterkiefer. Implantol 23, 383-393 (2015)

Passia, N., Kern, M.: Prosthetic treatment concepts for the reduced dentition at dental schools in Germany. Int J Prosthodont 28, 429-435 (2015).

Passia, N., Lehmann, F., Kern, M.: Tensile bond strength of different universal adhesive systems to lithium disilicate ceramic. J Am Dent Assoc 146, 729-734 (2015).

Passia, N., Sasse, M., Kern, M.: Minimalinvasive Behandlungskonzepte: Die einflügelige Adhäsivbrücke im Frontzahnbereich und das mittige Einzelimplantat im zahnlosen Unterkiefer“. Dtsch Zahnärztl Z 70, 330-337 (2015).

Passia, N., Wolfart, S., Kern, M.: Six-year clinical outcome of single implant-retained mandibular overdentures – a pilot study. Clin Oral Implant Res 26, 1191-1194 (2015).

Samran, A., Al-Afandi, M., Kadour, J., Kern, M.: Effect of ferrule location on the fracture resistance of crowned lower premolars. An in vitro study. J Prosthet Dent 114, 86-91 (2015).

Sasse, M., Callea, S., Kern, M.: Ein neuer gingivafarbener Bis-Acryl-Kompositkunststoff - Vorteile der klinischen Anwendung. Quintessenz 66, 413-421 (2015).

Sasse, M., Kern, M.: Clinical outcome of posterior all-ceramic inlay-retained fixed dental prostheses. J Dent Res 94, Abstr No 0246 (2015).

Sasse, M., Kern, M.: Long-term outcome of three-unit fixed dental prostheses made from monolithic lithium disilicate ceramic. J Dent Res 94, Abstr No 0245 (2015).

Schwendicke, F., Kern, M., Dörfer, C., Kleemann-Lüpkes, J., Paris, S., Blunck, U.: Influence of using different bonding systems and composites on the margin integrity and the mechanical properties of selectively excavated teeth in vitro. J Dent 43, 327-334 (2015).

Steinebrunner, L., Harder, S., Wolfart, S., Freitag-Wolf, S., Kern, M.: The precision of mechanical torque wrenches used for implants in dental offices. Int J Prosthodont 28, 527-530 (2015).

Ugurel, C.S., Steiner, M., Isik-Ozkol, G., Kutay, O., Kern, M.: Mechanical resistance of screwless morse taper and screw-retained implant-abutment connections. Clin Oral Implants Res 26, 137-142 (2015).

Wille, S., van Broeck, V., Strunskus, T., Faupel, F., Kern, M.: Quantitative evaluation of contamination on zirconia by silicone disclosing agent after different cleaning procedures. Materials 8, 2650-2657 (2015).

Wolfart, S., Kern, M.: Zementieren von implantatgetragenen Restaurationen. Implantol 23, 161-172 (2015).

Zurück zum Anfang


2014


Bateli, M., Kern, M., Wolkewitz, M., Strub, J.R., Att, W.: A retrospective evaluation of teeth restored with zirconia ceramic posts: 10-year results. Clin Oral Invest 18, 1181-1187 (2014).

Behr, M., Spitzer, A., Preis, V., Weng, D., Gosau, M., Rosentritt, M.: The extent of luting agent remnants on titanium and zirconia abutment analogs after scaling. Int J Oral Maxillofac Implants. 29:1185-1192 (2014)

Chaar, M.S., Kern, M.: Ten-year clinical outcome of posterior FDPs made from In-Ceram zirconia. J Dent Res 93, Abstr No 0049 (2014).

Cooper, L.F., Reside, G.J., Raes, F., Garriga, J.S., Tarrida, L.G., Wiltfang, J., Kern, M., De Bruyn, H.: Immediate provisionalization of dental implants placed in healed alveolar ridges and extraction sockets: A 5-year prospective evaluation. Int J Oral Maxillofac Implants 29, 709-717 (2014).

Cooper, L.F., Cooper, L.F., Reside, G., Raes, F., Garriga, J.S., Tarrida, L.G., Wiltfang, J., Kern, M., Bruyn, H.D.: Immediate provisionalization of dental implants in grafted alveolar ridges in the esthetic zone: a 5-year evaluation. Int J Periodont Rest Dent 34, 477-486 (2014).

Ebeid, K.,Wille, S., Hamdy, A., Salah, T., El-Etreby, A., Kern, M.: Effect of changes in sintering parameters on monolithic translucent zirconia. Dent Mater 30, e419-424 (2014).

Ebeid, K., Wille, S., Hamdy, A., Salah, T., El-Etreby, A., Kern, M.: Effect of changes in sintering parameters on monolithic zirconia ceramic. J Dent Res 93, Abstr No 1444 (2014).

Fuhrmann, G., Steiner, M., Freitag-Wolf, S., Kern, M.: Resin bonding to three types of polyaryletherketones (PAEKs)-Durability and influence of surface conditioning. Dent Mater 30, 357-363 (2014).

Gedamu, D., Paulowicz, I., Kaps, S., Lupan, O., Wille, S., Haidarschin, G., Mishra, Y. K., Adelung, R.: Rapid fabrication technique for interpenetrated ZnO nanotetrapod networks for fast UV-sensors. Adv Mater 26, 1541-1550 (2014).

Hallmann, L., Ulmer, P., Wille, S., Kern, M.: Effect of differences in coefficient of thermal expansion of veneer and Y-TZP ceramics on interface phase transformation. J Prosthet Dent 112, 591-599 (2014).

Harder, S.: Festsitzende Implantatprothetik: Alles Vollkeramik? – ein Praxiskonzept, dessen Stärken und Limitationen. Dtsch Zahnärztl Z 69, 315-325 (2014).

Helal, M.A., Baraka, O.A., Sanad, M.E., Al-Khiary, Y., Ludwig, K., Kern, M.: Effect of clasp design on retention at different intervals by using different abutment materials and in a simulated oral condition. J Prosthodont 23, 140-145 (2014).

Hertrampf, K., Wenz, H.-J., Koller, M., Ambrosch, P., Arpe, N., Wiltfang, J.: Knowledge of diagnostic and risk factors in oral cancer: Results from a large-scale survey among non-dental healthcare providers in Northern Germany. J Craniomaxillofac Surg 42, 1160-1165 (2014)

Kern, M.: Cementation Procedures for Ceramics. In Ferencz JL, Silva NRFA, Navarro JM (Hrsg): High-Strength Ceramics: Interdisciplinary Perspectives. Quintessence Publ. Co. Inc., Chicago 2014, 173-186.

Kern, M., Chaar, M.S.: Five-year clinical outcome of zirconia ceramic inlay-retained FDPs. J Dent Res 93, Abstr No 0047 (2014).

Klosa, K., Warnecke, H., Kern, M.: Effectiveness of protecting a zirconia bonding surface against contaminations using a newly developed protective lacquer. Dent Mater 30, 785-792 (2014). 

Lin, J., Zheng, W.Y., Liu, P.R., Zhang, N., Lin, H.P., Fan, Y.J., Mehl, C.: Influence of casein phosphopeptide-amorphous calcium phosphate application, smear layer removal, and storage time on resin-dentin bonding. J of Zhejiang Uni Science B.15:649-660 (2014).

Mehl, C., Wolfart, S., Vollrath, O., Wenz, H.J., Kern, M.: Perception of dental esthetics in different cultures. Int J Prosthodont 27, 523-529 (2014).

Mishra, Y. K., Kaps, S., Schuchardt, A., Paulowicz, I., Jin, X., Gedamu, D., Wille, S., Lupan, O., Adelung, R.: Versatile fabrication of complex shaped metal oxide nano-microstructures and their interconnected networks for multifunctional applications. KONA Powder Part J 31:92-110 (2014).

Mitsias, M., Koutayas, S.O., Wolfart, S., Kern, M.: Influence of zirconia abutment preparation on the fracture strength of single implant lithium disilicate crowns after chewing simulation. Clin Oral Implants Res 25, 675-682 (2014).

Passia, N., Brezavscek, M., Fritzer, E., Kappel, S., Kern, T., Luthardt, R.G., Maltzahn, N.F.V., Mundt, T., Raedel, M., Stein-Lausnitz, A.V., Kern, M.: Single dental implant in the edentulous mandible – recruitment-considerations. J Dent Res 93, Abstr No 0140 (2014).

Passia, N., Brezav Ek, M., Fritzer, E., Kappel, S., Kern, T., Luthardt, R.G., Frfr von Maltzahn, N., Mundt, T., Radel, M., von Stein-Lausnitz, A., Kern, M.: Single dental implant retained mandibular complete dentures - influence of the loading protocol: study protocol for a randomized controlled trial. Trials 15, 186 (2014).

Passia, N., Kern, M.: The single midline implant in the edentulous mandible: a systematic review. Clin Oral Invest 18, 1719-1724 (2014).

Passia, N., Sasses, M., Kern, M.: Das mittige Einzelimplantat im zahnlosen Unterkiefer. Deutscher Zahnärztekalender 73, 31-41 (2014).

Reissmann, D.R., Heydecke, G., Schierz, O., Marre, B., Wolfart, S., Strub, J.R., Stark, H., Pospiech, P., Mundt, T., Hannak, W., Hartmann, S., Wöstmann, B., Luthardt, R.G., Boning, K.W., Kern, M., Walter, M.H.: The randomized shortened dental arch study: temporomandibular disorder pain. Clin Oral Invest 18, 2159-2169 (2014).

Sasse, M., Kern, M.: All-ceramic resin-bonded fixed dental prostheses - Treatment planning, clinical procedures, and outcome. Quintessence Int 45, 291-297 (2014).

Sasse, M., Kern, M.: Survival of anterior cantilevered all-ceramic resin-bonded fixed dental protheses made from zirconia ceramic. J Dent 42, 660-663 (2014).

Sasse, M., Kern, M., Marre, B., Walter, M.H.: Clinical performance of cantilevered fixed dental prostheses abutments in the shortened dental arch. J Dent 42, 373-376 (2014).

Schneider, B.-J., Freitag-Wolf,  S., Kern, M.: Tactile sensitivity of vital and endodontically treated teeth. J Dent 42, 1422-1427 (2014).

Schwendicke F, Kern M, Blunck U, Dörfer C, Drenck J, Paris S.: Marginal integrity and secondary caries of selectively excavated teeth in vitro. J Dent 42, 1261-1268 (2014).

Schwendicke, F., Kern, M., Meyer-Lueckel, H., Boels, A., Doerfer, C., Paris, S.: Fracture resistance and cuspal deflection of incompletely excavated teeth. J Dent 42, 107-113 (2014).

Shahin, R., Tannous, F., Kern, M.: Inlay-retained cantilever fixed dental prostheses to substitute a single premolar: impact of zirconia framework design after dynamic loading. Eur J Oral Sci 122, 310-316 (2014).

Walter, M.H., Marre, B., Vach, K., Strub, J., Mundt, T., Stark, H., Pospiech, P., Wostmann, B., Heydecke, G., Kern, M., Hartmann, S., Luthardt, R., Huppertz, J., Wolfart, S., Hannak, W.: Management of shortened dental arches and periodontal health: 5-year results of a randomised trial. J Oral Rehabil 41, 515-522 (2014).

Wenz, H.J., Zupanic, M., Klosa, K., Schneider, B., Karsten, G.: Using an audience response system to improve learning success in practical skills training courses in dental studies - a randomised, controlled cross-over study. Eur J Dent Educ 18, 147-153 (2014).

Wolfart, S., Harder, S., Reich, S., Sailer, I.: Implantatprothetik – Ein Patientenorientiertes Konzept, Quintessenz Verlags GmbH. (2014)

Wolfart, S., Lawrenz, B., Schley, J.S., Kern, M., Springer, I.: Composite images of upper front teeth-judgment of attractiveness and gender-specific correlation. J Esthet Restor Dent 26, 394-402 (2014).

Wolfart, S., Müller, F., Gerss, J., Heyedcke, G., Marre, B., Böning, K., Wöstmann, B., Kern, M., Mundt, T., Hannak, W., Bruckner, J., Passia, N., Jahn, F., Hartmann, S., Stark, H., Richter, E.J., Gernet, W., Luthardt, R.G., Walter, M.H.: The randomized shortened dental arch study: oral health-related quality of life. Clin Oral Invest 18, 525-533 (2014).

Zurück zum Anfang


2013


Adelung, R., Wille, S., Jin, X., Mishra, Y.K., Kern, M.: Zinkoxid-Tetrapoden im Plastik - Vom Dentalpolymer zur Verbindung nicht haftender Kunststoffe. GIT, Fachz. Lab. 7, 441-443 (2013).

Birkenfeld, F., Steiner, M., Kern, M., Wiltfang, J., Moller, B., Lucius, R., Becker, S.T.: Forces affecting orbital floor reconstruction materials - A cadaver study. J Craniomaxillofac Surg 41, e24-28 (2013).

Chaar, M.S., Kern, M.: Long-term clinical outcome of posterior metal-ceramic crowns fabricated with laser-sintering technology. J Dent Res 92, Spec Iss A, Abstr No 178 (2013).

Chaar, M.S., Witkowski, S., Strub, J.R., Att, W.: Effect of veneering technique on the fracture resistance of zirconia fixed dental prostheses. J Oral Rehabil. 40, 51-59 (2013).

de Bruyn, H., Raes, F., Cooper, L.F., Reside, G.J., Garriga, J.S., Tarrida, L.G., Wiltfang, J., Kern, M.: 3-years clinical outcome of immediate provisionalization of single osseospeedTM implants in extraction sockets and healed ridges. Clin Oral Implants Res 24, 217-223 (2013).

El Bahra, S., Ludwig, K., Kern, M.: Dimensional changes of injection-molded PMMA denture base resins J Dent Res 92, Spec Iss A, Abstr No 2444 (2013).

El Bahra, S., Ludwig, K., Samran, A., Freitag-Wolf, S., Kern, M.: Linear and volumetric dimensional changes of injection-molded PMMA denture base resins. Dent Mater 29, 1091-1097 (2013).

Harder, S., Egert, C., Wenz, H.J., Jochens, A., Kern, M.: Influence of the drill material and method of cooling on the development of intrabony temperature during preparation of the site of an implant. Br J Oral Maxillofac Surg 51, 74-78 (2013).

Harder, S., Podschun, R., Grancicova, L., Mehl, C., Kern, M.: Analysis of the intraimplant microflora of two-piece dental implants. Clin Oral Invest 17, 1135-1142 (2013).

Hertrampf, K., Wenz, H-J., Koller, M., Grund, S., Wiltfang, J.: Early detection of oral cancer: Dentists’ opinion and practices before and after educational interventions in Germany. J Craniomaxillofac Surg 41: e201-207 (2013).

Jin, X., Götz, M., Wille, S., Mishra, Y. K., Adelung, R., Zollfrank, C.: A novel concept for self-reporting materials: stress sensitive photoluminescence in ZnO tetrapod filled elastomers, Adv Mater 25, 1342-1347 (2013).

Klosa, K., Bösch, I., Kern, M.: Long-term bond of glass-ceramic and resin cement: Evaluation of titanium tetrafluoride as an alternative etching agent for lithium disilicate ceramics. J Adhes Dent 15, 377-383 (2013).

Koch, F.P., Weng, D., Kramer, S., Wagner, W.: Soft tissue healing at one-piece zirconia implants compared to titanium and PEEK implants of identical design: A histomorphometric study in the dog. Int J Periodontics Restorative Dent 33, 669-677 (2013).

Kohal, R.J., Bachle, M., Att, W., Chaar, S., Altmann, B., Renz, A., Butz, F.: Osteoblast and bone tissue response to surface modified zirconia and titanium implant materials. Dent Mater 29, 763-776 (2013).

Krummel, A., Klosa, K., Kern, M.: Fracture resistance of full-coverage adhesively luted occlusal lithium-disilicate ceramic restorations. J Dent Res 92, Spec Iss A, Abstr No 1617 (2013).

Lehmann, F., Kern, M.: Bond strength of universal adhesive systems to lithium disilicate ceramic. J Dent Res 92, Spec Iss A, Abstr No 1079 (2013).

Lin, J., Kern, M., Ge, J., Zhu, J., Wang, H., Vollrath, O., Mehl, C.:  Influence of peripheral enamel bonding and chlorhexidine pretreatment on resin bonding to dentin. J Adhes Dent 15, 351-359 (2013).

Mehl, C., Becker, S.T., Acil, Y., Harder, S., Wiltfang, J., Dabbagh-Afrouz, A., de Buhr, W, Kern, M.: Impact of vertical loading on the implant-bone interface. Clin Oral Implants Res 24, 949-956 (2013).

Mehl, C., Harder, S., Byrne, A., Kern, M.: Prosthodontics in digital times – a case report. Quintessence Int 44, 1-8 (2013).

Mehl, C., Harder, S., Steiner, M., Vollrath, O., Kern, M.: Influence of the cement film thickness on the retention of implant-retained crowns. J Prosthodont 22, 618-625 (2013).

Mehl, C.J., Kern, M., Lin, J., Zhu, J, Ge, J, Vollrath, O., Wang, H.: Influence of peripheral enamel bonding and chlorhexidine pretreatment on resin bonding to dentin. J Adhes Dent 15, 351-359 (2013).

Mishra, Y. K., Kaps, S., Schuchardt, A., Paulowicz, I., Jin, X., Gedamu, D., Freitag, S., Claus, M., Wille, S., Kovalev, A., Gorb, S. N., Adelung, R.: Fabrication of macroscopically flexible and highly porous 3D semiconductor networks from interpenetrating nanostructures by a simple flame transport approach, Part & Part Syst Charac 30, 775-783 (2013).

Passia, N., Wolfart, S., Kern, M.: 5-year clinical outcome of single implant-retained mandibular overdentures. J Dent Res 92, Spec Iss A, Abstr No 234 (2013).

Samran, A., El Bahra, S., Kern, M.: The influence of substance loss and ferrule height on the fracture resistance of endodontically treated premolars. An in vitro study. Dent Mater 29, 1280-1286 (2013).

Sasse, M., Kern, M.: CAD/CAM single retainer zirconia-ceramic resin-bonded fixed dental prostheses: clinical outcome after 5 years. Int J Comput Dent 16, 109-118 (2013).

Sasse, M., Kern, M.: Vollkeramische Adhäsivbrücken - Planung, Vorgehen und Bewährung. Quintessenz 64, 1225-1232 (2013).

Sasse, M., Wolfart, S., Kern, M.: Long-term outcome of posterior zirconia ceramic fixed dental prostheses. J Dent Res 92, Spec Iss A, Abstr No 3049 (2013).

Schneider, B.-J., Kern, M.: Verblendungsaustausch nach Bleaching. Quintessenz 64, 31-37 (2013).

Walter, M.H., Hannak, W., Kern, M., Mundt, T., Gernet, W., Weber, A., Wostmann, B., Stark, H., Werner, D., Hartmann, S., Range, U., Jahn, F., Passia, N., Pospiech, P., Mitov, G., Bruckner, J., Wolfart, S., Busche, E., Luthardt, R.G., Heydecke, G., Marre, B.: The randomized shortened dental arch study: tooth loss over five years. Clin Oral Invest 17, 877-886 (2013).

Walter, M.H., Range, U., Marré, B., Gernet, W., Boening, K., Hartmann, S., Gitt, I., Heydecke, G., Stark, H., Luthardt, R.G., Strub, J., Mundt, T., Wöstmann, B., Pospiech, P.R., Wolfart, S., Jahn, F., Kern, M., Huppertz, J., Hannak, W.B.: Randomized shortened dental arch study: periodontal health over five years J Dent Res 92, Spec Iss A, Abstr No 2870 (2013).

Wolfart, S, Moll, D, Hilgers, RD, Wolfart, M, Kern, M.: Implant placement under existing removable dental prostheses and its effect on oral health-related quality of life. Clin Oral Implants Res 12:1354-1359 (2013).

Zurück zum Anfang


2012


Azimian, F., Klosa, K., Kern, M.: Evaluating a new universal primer for ceramics and alloys. J Adhes Dent 14, 275-282 (2012).

Becker ST, Menzebach M., Küchler T., Hertrampf K., Wenz H-J., Wiltfang J.: Quality of life in oral cancer patients – E ffects of mandible resections and socio-cultural aspects. J Craniomaxillofac Surg 40, 24-27 (2012).

Birkenfeld, F., Becker, Lucius, R., Harder, S., M.E., Kern, M.: Increased intraosseous temperature caused by ultrasonic devices during bone surgery and the influences of working pressure and cooling irrigation. Int J Oral Maxillofac Implants 27, 1382-1388 (2012).

Birkenfeld, F., Steiner, M., Becker, M.E., Kern, M., Wiltfang, J., Lucius, R., Becker, S.T.: Forces charging the orbital floor after orbital trauma. J Craniofac Surg 23, 953-956 (2012).

Birkenfeld, F., Steiner, M., Kern, M., Witlfang, J., Moller, B., Lucius, R., Becker, S.T.: Maximum forces applied to the orbital floor after fractures. J Craniofac Surg 23, 1491-1494 (2012).

Chaar, M., Kern, M.: Langzeitbewährung von dreigliedrigen Seitenzahnbrücken aus einer zirkonoxidverstärkten Aluminiumoxidkeramik. Abstraktband. 61. Jahrestagung der Deutschen Gesellschaft für Prothetische Zahnmedizin und Biomaterialien (DGPro) in Kooperation mit der AG Dentale Technologie e.V., Böblingen 2012, KV23, S. 16.

Harder, S., Quabius, E.S., Ossenkop, L., Kern, M.: Assessment of lipopolysaccharide microleakage at conical implant-abutment connections. Clin Oral Invest 16, 1377-1384 (2012).

Harder, S., Quabius, E.S., Ossenkop, L., Mehl, C., Kern, M.: Surface contamination of dental implants assessed by gene expression analysis in a whole-blood in vitro assay. A preliminary study. J Clin Periodontol 39, 987-994 (2012).

Helal, M.A., Baraka, O.A., Sanad, M.E., Ludwig, K., Kern, M.: Effects of long-term simulated RPD clasp attachment/detachment on retention loss and wear for two clasp types and three abutment material surfaces. J Prosthodont 21, 370-377 (2012).

Hertrampf, K., Wenz, H-J., Koller, M., Wiltfang, J.: Comparing dentists' and public's awareness about oral cancer in a community-based study in Northern Germany. J Craniomaxillofac Surg 40, 28-32 (2012).

Hertrampf, K., Wenz, H-J., Koller, M., Wiltfang, J.: Public awareness about prevention and early detection of oral cancer: A population-based study in Northern Germany. J Craniomaxillofac Surg 40, 82-86 (2012)

Hertrampf, K., Wiltfang, J., Katalinic, A., Timm, O., Wenz, H-J.: Recent trends in incidence and mortality of oral and oropharyngeal cancer in Northern Germany. Journal Community Dent Health 29, 268-273 (2012)

Hertrampf, K., Wiltfang, J., Katalinic, A., Timm, O., Wenz, H-J.: Trends in incidence, tumour sites and tumour stages of oral and pharyngeal cancer in Northern Germany. J Cancer Res Clin Oncol 138, 431-437 (2012)

Heydecke, G., Seedorf, H., Kern, M., Edelhoff, D., Yildirim, M.: Leitline S1-Empfehlung "Festsitzender Zahnersatz für zahnbegrenzte Lücken". Dtsch Zahnärztl Z 67, 664-672 (2012).

Kern, M.: Das Begutachtungsverfahren - manchmal mühsam, aber immer wertvoll! Implantologie 20, 3 (2012).

Kern, M.: Das mittige Einzel-Implantat im zahnlosen Unterkiefer - ein Update. Implantol 20, 23-30 (2012).

Kern, M.: Die Putzschiene – ein effizientes Mundhygienehilfsmittel bei Teil- und Deckprothesen. Quintessenz 63, 1405-1414 (2012).

Kern, M.: Rückbesinnung in der Implantologie? Implantologie 20, 267 (2012).

Kern, M., Kohal, R.J., Mehl, A., Pospiech, P., Frankenberger, R., Reiss, B., Wiedhahn, K., Kunzelmann, K.H.: Vollkeramik auf einen Blick. 5. Auflage. Arbeitsgemeinschaft für Keramik in der Zahnheilkunde e.V., Ettlingen 2012.

Kern, M, Lehmann, F.: Influence of surface conditioning on bonding to polyetheretherketon (PEEK). Dent Mater 28, 1280-1283 (2012).

Kern, M., Sasse, M., Wolfart, S.: Authors' response. J Am Dent Assoc 143, 829-830 (2012).

Kern, M., Sasse, M., Wolfart, S.: Ten-year outcome of three-unit fixed dental prostheses made from monolithic lithium disilicate ceramic. J Am Dent Assoc 143, 234-240 (2012).

Koutayas, S.O., Mitsias, M., Wolfart, S., Kern, M.: Influence of preparation mode and depth on the fracture strength of zirconia ceramic abutments restored with lithium disilicate crowns. Int J Oral Maxillofac Implants 27, 839-848 (2012).

Lehmann, K. M., Hellwig, E., Wenz, H.-J.: Zahnärztliche Propädeutik – Einführung in die Zahnheilkunde. 12. Auflage. Deutscher Zahnärzte Verlag, Köln 2012.

Luthardt, R., Ding, R., Wolfart, S., Hannak, W., Stark, H., Passia, N., Wöstmann, B., Mundt, T., Heydecke, G., Jahn, F., Kern, M., Pospiech, P., Birkner, L., Hartmann, S., Güth, J.-F., Busche, E., Huppertz, J., Marré, B., Weber, A., Boening, K., Walter, M., Rudolph, H.: RaSDA: 3D-assessment of tooth movements based on master-casts. J Dent Res 91(Spec Iss A),Abstr No 0680 (2012). 41st AADR Annual Meeting, March 21st-24th, 2012, Tampa, Florida, USA (http://www.dentalresearch.org).

Luthardt, R.,Weber, A., Marré, B., Gitt, I., Gerss, J., Hannak, W., Hartmann, S., Heydecke, G., Huppertz, J., Jahn, F., Ludwig, A., Mundt, T., Kern, M., Klein, V., Pospiech, P., Stumbaum, M., Wolfart, S., Wöstmann, B., Busche, E., Böning, K., Walter, M.: Randomized Shortened Dental Arch Study (RaSDA): Analyse des Zahnverlustes über 5 Jahre. Abstraktband. 61. Jahrestagung der Deutschen Gesellschaft für Prothetische Zahnmedizin und Biomaterialien (DGPro) in Kooperation mit der AG Dentale Technologie e.V., Böblingen 2012, KV17, S. 12.

Mehl, C., Harder, S., Schwarz, D., Steiner, M., Vollrath, O., Kern, M.: In vitro influence of ultrasonic stress, removal force preload and thermocycling on retrievability of implant-retained crowns. Clin Oral Implants Res 23, 930-937 (2012).

Mehl, C, Harder, S, Shahriari, A, Steiner, M, Kern, M.: Influence of abutment height and thermocycling on retrievability of cemented implant-supported crowns. Int J Oral Maxillofac Implants 27, 1106-1115 (2012).

Mehl, C., Wang, H., Lin, J., Han, S., Zhu, J., Wang, X., Chen, Y., Vollrath, O.: Influence of fluoride-containing acidic artificial saliva on the
mechanical properties of Nickel-Titanium orthodontics wires. Indian J Dent Res 23, 52-56 (2012).

Quabius, E.S., Ossenkop, L., Harder, S., Kern, M.: Dental implants stimulate expression of Interleukin-8 and its receptor in human blood. An in vitro approach. J Biomed Mater Res B Appl Biomater 100, 1283-1288 (2012).

Sasse, M., Eschbach, S., Kern, M.: Randomized clinical trial on single retainer all-ceramic resin-bonded fixed dental prostheses: Influence of the bonding system after up to 55 months. J Dent 40, 783-786 (2012).

Sasse, M., Kern, M.: Klinische Daten zur Bewährung einflügeliger Adhäsivbrücken aus Zirkonoxidkeramik nach bis zu 90 Monaten. Abstraktband. 61. Jahrestagung der Deutschen Gesellschaft für Prothetische Zahnmedizin und Biomaterialien (DGPro) in Kooperation mit der AG Dentale Technologie e.V., Böblingen 2012, KV27, S. 18.

Schnurre, A., Klosa, K., Kern, M.: Klebeverbund zu einer vorgeätzten Silikatkeramik nach spezifischer Kontamination und Reinigung. Abstraktband. 61. Jahrestagung der Deutschen Gesellschaft für Prothetische Zahnmedizin und Biomaterialien (DGPro) in Kooperation mit der AG Dentale Technologie e.V., Böblingen 2012, KV18, S. 13.

Steiner, M., Kern, M.: Rautiefe nach Korundstrahlung in Abhängigkeit verschiedener Parameter. Abstraktband. 61. Jahrestagung der Deutschen Gesellschaft für Prothetische Zahnmedizin und Biomaterialien (DGPro) in Kooperation mit der AG Dentale Technologie e.V., Böblingen 2012, P7, S.31.

Tannous, F., Steiner, M., Shahin, R., Kern, M.: Retentive forces and fatigue resistance of thermoplastic resin clasps. Dent Mater 28, 273-278 (2012).

Walter, M.,  Weber , A., Pospiech, P., Böning, K., Busche, E., Gerß, J., Gitt, I., Hartmann, S., Hannak, W., Jahn, F., Kern, M.,  Ludwig, A., Luthardt, R.G., Marré, B., Mundt, T., Richter, E.-J., Stark, H., Stumbaum, M., Werner , D., Wöstmann, B., Wolfart, S., Heydecke, G.: Randomisierte Studie zur verkürzten Zahnreihe: 5-Jahresergebnisse der Pilotstudie. Dtsch Zahnärztl Z 67, 360-363 (2012).

Wolfart, S., Marré, B., Wöstmann, B., Kern, M., Mundt, T., Luthardt, R.G., Huppertz, J., Hannak, W., Reiber, T., Passia, N., Heydecke, G., Reinhardt, W., Hartmann, S., Busche, E., Mitov, G., Stark, H., Pospiech, P., Weber, A., Gernet, W., Walter, M.H.: The Randomized Shortened Dental Arch Study: 5-year Maintenance. J Dent Res 91, S65-71 (2012).

Wolfart, S., Weyer, N., Kern, M.: Patient attendance in a recall program after prosthodontic rehabilitation: A 5-year follow-up. Int J Prosthodont 25, 491-496 (2012).

Zurück zum Anfang


2011


Abou Tara, M., Eschbach, S., Bohlsen, F., Kern, M.: Clinical outcome of metal-ceramic crowns fabricated with laser-sintering technology. Int J Prosthodont 24, 46-48 (2011).

Abou Tara, M., Eschbach, S., Bohlsen, F., Kern, M.: Klinische Ergebnisse mit lasergesinterten Metallkeramikkronen. Quintessenz Zahntechnik 37, 796-799 (2011).

Abou Tara, M., Eschbach, S., Wolfart, S., Kern, M.: Zirconia ceramic inlay-retained fixed dental prostheses-first clinical results with a new design. J Dent 39, 208-211 (2011).

Attia, A., Kern, M.: Effect of cleaning methods after reduced-pressure air abrasion on bonding to zirconia ceramic. J Adhes Dent 13, 561-567 (2011).

Attia, A., Kern, M.: Long-term resin bonding to zirconia ceramic with a new universal primer. J Prosthet Dent 106, 319-327 (2011).

Attia, A., Lehmann, F., Kern, M.: Influence of surface conditioning and cleaning methods on resin bonding to zirconia ceramic. Dent Mater 27, 207-213 (2011).

Baresel, A., Steiner, M., Kern, M., Wenz, H.-J.: Cutting efficiency and surface roughness of different diamond burs. J Dent Res 90, Spec Iss A, Abstr No 637 (2011).

Becker, M.E., Birkenfeld, F., Kessler, B., Kern, M., Lucius, R.: Analysis of human enamel surface composition using SEM-EDX. J Dent Res 90, Spec Iss A, Abstr No 732 (2011).

Birkenfeld, F., Steiner, M., Becker, M.E., Kern, M., Menzebach, M., Wiltfang, J., Lucius, R., Becker, S.T.: Forces charging the orbital floor after fractures. J Craniofac Surg 22, 1641-1646 (2011).

Edelhoff, D., Fischer, J., Kern, M., Stawarcyk, B., Tinschert, J., Weber, W.: Zirkon - und die richtige Bezeichnung ist? Quintessenz Zahntech 37, 227-230 (2011).

Egert, C., Harder, S., Steiner, M., Wenz, H.-J., Kern, M.: Intraosseous temperature development during implant site preparation using different burs J Dent Res 90, Spec Iss A, Abstr No 3404 (2011).

Harder, S., Podschun, R., Grancicova, L., Cassens, M., Kern, M.: Evaluation of intraimplant bacteria contamination of two stage implants. J Dent Res 90, Spec Iss A, Abstr No 3415 (2011).

Harder, S., Wolfart, S., Egert, C., Kern, M.: Three-year clinical outcome of single implant-retained mandibular overdentures-results of preliminary prospective study. J Dent 39, 656-661 (2011).

Harder, S., Wolfart, S., Kern, M.: Einzelimplantatversorgung mit individuell gefrästen Zirkonoxidkeramik-Abutments. Darstellung des klinischen und labortechnischen Vorgehens. Implantol 19, 289-297 (2011).

Heintze, S.D., Albrecht, T., Cavalleri, A., Steiner, M.: A new method to test the fracture probability of all-ceramic crowns with a dual-axis chewing simulator. Dent Mater 27, e10-e19 (2011)

Hertrampf K., Wiltfang J., Koller M., Grund S, Wenz H-J.: The oral cancer knowledge of dentists in Northern Germany after educational intervention. Eur J Cancer Prev 20, 431-437 (2011).

Kern, M.: Behandle deine Patienten, wie du auch selbst behandelt werden willst. Dental Magazin 29, 303 (2011).

Kern, M.: Diagnostik, Planung, Therapie – alles digital? Implantologie 19, 227 (2011).

Kern, M.: in Expertenzirkel: Befestigungszemente - adhäsiv versus konventionell. Dental Magazin 29, 314-325 (2011).

Kern, M.: Interview über Forschung und Lehre in der Zahnmedizin. Quintessenz 62, 1079-1081 (2011)

Kern, M.: Misserfolge vermeiden - adäquate Retentions- und Widerstandsform von Brückenpfeilern. Quintessenz 62, 1017-1023 (2011)

Kern, M., Böning, K.W., Stark, H., Wolowski, A., Wöstmann, B., Walter, M.H.: Präventionsorientierte Strategien in der Prothetischen Zahnmedizin. Bundesgesundheitsbl 54: 1102-1109 (2011)

Kern, M., Sasse, M.: Ten-year survival of anterior all-ceramic resin-bonded fixed dental prostheses. J Adhes Dent 13, 407-410 (2011).

Kern, M., Swift, E.J., Jr.: Bonding to zirconia. J Esthet Restor Dent 23, 71-72 (2011).

Klosa, K., Wiltfang, J., Wenz, H.J., Koller, M., Hertrampf, K.: Dentists' opinions and practices in oral cancer prevention and early detection in Northern Germany. Eur J Cancer Prev 20, 313-319 (2011).

Lehmann, F., Kern, M.: Resin bond strength to polyetheretherketon (PEEK) using different surface treatments. J Dent Res 90, Spec Iss A, Abstr No 520 (2011).

Lin, J., Zhu, J., Gu, X., Wen, W., Li, Q., Fischer-Brandies, H., Wang H.,Mehl, C.: Effects of incorporation of nano-fluorapatite or nano-fluorohydroxyapatite on a resin-modified glass ionomer cement. Acta Biomater 7, 1346-1353 (2011).

Mangold, J.T., Kern, M.: Influence of glass-fiber posts on the fracture resistance and failure pattern of endodontically treated premolars with varying substance loss: An in vitro study. J Prosthet Dent 105, 387-393 (2011).

Mehl, C.J., Harder, S., Kern, M., Wolfart, S.: Patients' and dentists' perception of dental appearance. Clin Oral Invest 15, 193-199 (2011).

Mehl, C., Heblich, F., Lenz, R., Ludwig, K., Kern, M.: The influence of a hyperbaric environment and increased oxygen partial pressure on the corrosion of dental alloys. Div Hyperbar Med 41, 151-155 (2011).

Mehl, C.J., Lang, B., Kappert, H., Kern, M.: Microstructure analysis of dental castings used in fixed dental prostheses-a simple method for quality control. Clin Oral Invest 15, 383-391 (2011).

Ossenkop, L., Harder, S., Quabius, E.S., Kern, M.: Surface pyrogen contamination of commercial dental implants. J Dent Res 90, Spec Iss A, Abstr No 3412 (2011).

Podschun, R., Grancicova, L., Cassens, M., Kern, M., Harder, S.: Bacterial diversity of dental intra-implant contamination. Int J Med Microbiol 301 (Suppl. 47) 51 (2011).

Quabius, E.S., Zhang, S., Aksal, N., Kern, M.: MMP-inhibitors in a total-etch-adhesive-bonding-system: MMP-activity, odontoblast survival, immune-competence and MMP-expression. J Dent Res 90, Spec Iss A, Abstr No 275 (2011).

Sasse, M., Eschbach, S., Kern, M.: Clinical outcome of single retainer all-ceramic resin-bonded fixed dental protheses. J Dent Res 90, Spec Iss A, Abstr No 1935 (2011).

Steiner, M., Birkenfeld, F., Becker, M.E., Kern, M., Menzebach, M., Wiltfang, J., Lucius, R., Becker, S.: Measuring force and displacement in the orbital floor J Dent Res 90, Spec Iss A, Abstr No 878 (2011).

Steiner, M., Sasse, M., Kern, M.: Fracture resistance of all-ceramic crown systems. J Dent Res 90, Spec Iss A, Abstr No 2999 (2011).

Stenger, B.-J., Harder, S., Kern, M.: Responsiveness of vital and endodontically treated teeth to loading. J Dent Res 90, Spec Iss A, Abstr No 492 (2011).

Strub, J.R., Kern, M.,Türp, J., Wittkowski, S., Heydecke, G., Wolfart, S.: Curriculum Prothetik. Band I. Geschichte - Grundlagen - Behandlungskonzept - Vorbehandlung. 4., überarbeitete und erweiterte Auflage, Quintessenz Verlag, Berlin 2011.

Strub, J.R., Kern, M.,Türp, J., Wittkowski, S., Heydecke, G., Wolfart, S.: Curriculum Prothetik. Band II. Artikulatoren - Ästhetik - Werkstoffkunde - Festsitzende Prothetik. 4., überarbeitete und erweiterte Auflage, Quintessenz Verlag, Berlin 2011.

Strub, J.R., Kern, M.,Türp, J., Wittkowski, S., Heydecke, G., Wolfart, S.:  Curriculum Prothetik. Band III. Kombinierte und abnehmbare Prothetik - Implantologie - Nachsorge - Psychologie. 4., überarbeitete und erweiterte Auflage, Quintessenz Verlag, Berlin 2011.

Tannous, F., Steiner, M., Shahin, R., Kern, M.: Retentive forces and fatigue resistance of different thermoplastic resin clasps. J Dent Res 90, Spec Iss A, Abstr No 2414 (2011).

Walter, M.H., Weber, A., Pospiech, P.R., Boening, K., Busche, E., Gerss, J., Gitt, I., Hartmann, S., Hannak, W., Jahn, F., Kern, M., Passia, N., Luthardt, R., Marré, B., Mundt, T., Richter, E.-J., Stark, H., Stumbaum, M., Werner, D., Wöstmann, B., Wolfart, S., Heydecke, G.: Prosthetic treatment of shortened dental arches: a prospective pilot study. J Dent Res 90, Spec Iss A, Abstr No 1031 (2011).

Weng, D.: Eine Handgelenkröntgenaufnahme ist kein Garant für die vertikale Stabilität eines Implantats. Implantol 19, 419-424 (2011).

Weng, D.: Sofortversorgung eines oberen Schneidezahnes. Z Oral Implant 7, 28-33 (2011).

Weng, D.: Zementreste als Ursache für Periimplantitis. Ein Fallbericht. Implantol 19, 171-177 (2011)

Weng, D., Nagata, M.J., Bosco, A.F., de Melo, L.G.: Influence of microgap location and configuration on radiographic bone loss around submerged implants: an experimental study in dogs. Int J Oral Maxillofac Implants 26, 941-946 (2011).

Weng, D., Nagata, M.J., Leite, C.M., de Melo, L.G., Bosco, A.F.: Influence of microgap location and configuration on radiographic bone loss in nonsubmerged implants: an experimental study in dogs. Int J Prosthodont 24, 445-452 (2011).

Weng, D., Stock, V., Schliephake, H.: Are socket and ridge preservation techniques at the day of tooth extraction efficient in maintaining the tissues of the alveolar ridge? Systematic review, consensus statements and recommendations of the 1st DGI Consensus Conference in September 2010, Aerzen, Germany. Eur J Oral Implantol 4 (Suppl), S59-S66 (2011)

Wolfart, S., Lawrenz, B., Kern, M., Springer, I.N.: Tooth shape relates to gender – a widespread misbelief J Dent Res 90, Spec Iss A, Abstr No 1766 (2011).

 

Zurück zum Anfang

 


2010


Abou Tara, M., Wolfart, S., Kern, M.: Preliminary results with newly designed zirconia ceramic inlay- retained FDPs. J Dent Res 89 (Spec Iss A), Abstr No 178 (2010).

Albashaireh, Z.S., Ghazal, M., Kern, M.: Effects of endodontic post surface treatment, dentin conditioning, and artificial aging on the retention of glass fiber-reinforced composite resin posts. J Prosthet Dent 103, 31-39 (2010).

Albashaireh, Z.S., Ghazal, M., Kern, M.: Two-body wear of different ceramic materials opposed to zirconia ceramic. J Prosthet Dent 104, 105-113 (2010).

Birkenfeld, F., Becker, M.E., Kurz, B., Harder, S., Kern, M., Lucius, R.: Changes in human mandibular bone morphology after heat application. Ann Anat 192, 227-231 (2010).

Brunzel, S., Yang, B., Wolfart, S., Kern, M.: Tensile bond strength of a so-called self-adhesive resin to dentin. J Adhes Dent 12, 143-150 (2010).

Clausen, J.O., Abou Tara, M., Kern, M.: Dynamic fatigue and fracture resistance of non-retentive all- ceramic full-coverage molar restorations. Influence of ceramic material and preparation design. Dent Mater 26, 533-538 (2010).

Cooper, L.F., Raes, F., Reside, G.J., Garriga, J.S., Tarrida, L.G., Wiltfang, J., Kern, M., de Bruyn, H.: Comparison of radiographic and clinical outcomes following immediate provisionalization of single- tooth dental implants placed in healed alveolar ridges and extraction sockets. Int J Oral Maxillofac Implants 25, 1222-1232 (2010).

Ghazal, M., Kern, M.: Influence of loading forces on the vertical accuracy of interocclusal records. Quintessence Int 41, e31-35 (2010).

Ghazal, M., Kern, M.: Wear of denture teeth and their human enamel antagonists. Quintessence Int 41, 157-163 (2010).

Harder, S., Dimaczek, B., Açil, Y., Terheyden, H., Freitag-Wolf, S., Kern, M.: Molecular leakage at implant-abutment connection-in vitro investigation of tightness of internal conical implant-abutment connections against endotoxin penetration. Clin Oral Invest 14, 427-432 (2010).

Harder, S., Kern, M.: Provisorische Versorgung und Weichgewebskonditionierung - Vor und nach Einzelzahnimplantation. Implantol 18, 407-416 (2010).

Harder, S., Mehl, C., Kern, M.: Behandlungsmöglichkeiten bei tief frakturierten Pfeilerzähnen. Quintessenz 61, 1485-1494 (2010).

Harder S., Wolfart S., Eschbach S., Kern M.: Eight-year outcome of posterior inlay-retained all-ceramic fixed dental prostheses. J Dent 2010; 38: 875-881.

Hertrampf, K., Wiltfang, J., Koller, M., Klosa, K., Wenz, H.J.: Dentists' perspectives on oral cancer: a survey in Northern Germany and a comparison with international data. Eur J Cancer Prev 19, 144-152 (2010).

Kern, M.: Controlled airborne-particle abrasion of zirconia ceramic restorations. J Prosthet Dent 103, 127-128 (2010).

Kern, M.: Provisorische Versorgung - notwendiges Übel oder Chance? Implantol 18, 373 (2010).

Kern, M., Harder, S.: Antimicrobial filling of implant cavities. J Prosthet Dent 103, 321-322 (2010).

Kern, M., Harder, S., Wolfart, S.: Besser eins als keins. Das mittige Einzel-Implantat im zahnlosen Unterkiefer älterer Patienten. Zahnärztl Mitt 100, 2404-2408 (2010).

Kern, M., Kohal, R.J., Mehl, A., Pospiech, P., Frankenberger, R., Reiss, B., Wiedhahn, K., Kunzelmann, K.H.: Vollkeramik auf einen Blick. 4. Auflage, Arbeitsgemeinschaft für Keramik in der Zahnheilkunde e.V., Ettlingen 2010.

Lin, J., Mehl, C., Yang, B., Kern, M.: Durability of four composite resin cements bonded to dentin under simulated pulpal pressure. Dent Mater 26, 1001-1009 (2010).

Lin, J., Zhu, J., Gu, X., Wen, W., Li, Q., Fischer-Brandies, H., Wang, H., Mehl, C.: Effects of incorporation of nano-fluorapatite or nano-fluorohydroxyapatite on a resin-modified glass ionomer cement. Acta Biomater 7, 1346-1353 (2010).

Luthardt, R.G., Marre, B., Heinecke, A., Gerss, J., Aggstaller, H., Busche, E., Dressler, P., Gitt, I., Hannak, W., Hartmann, S., Heydecke, G., Jahn, F., Kern, M., Mundt, T., Pospiech, P., Stark, H., Wostmann, B., Walter, M.H.: The randomized shortened dental arch study (RaSDA): design and protocol. Trials 11, 15 (2010). doi:10.1186/1745-6215-11-15

Mangold, J.T., Kern, M.: Influence of posts on fracture resistance of endodontically treated teeth J Dent Res 89 (Spec Iss A), Abstr No 181 (2010).

Mehl, C., Ludwig, K., Steiner, M., Kern, M.: Fracture strength of prefabricated all-ceramic posterior inlay-retained fixed dental prostheses. Dent Mater 26, 67-75 (2010).

Shahin, R., Kern, M.: Effect of air-abrasion on the retention of zirconia ceramic crowns luted with different cements before and after artificial aging. Dent Mater 26, 922-928 (2010).

Shahin, R., Kern, M.: Retention of zirconia crowns with different cements and artificial aging. J Dent Res 89 (Spec Iss A), Abstr No 424 (2010).

Walter, M. H., Weber, A, Marré, B.; Gitt, I, Gerß, J., Hannak, W., Hartmann, S. Heydecke, G., Huppertz, J., Jahn, F., Ludwig, A., Mundt, T., Kern, Klein, V., Pospiech, P., Stumbaum, M., Wolfart, S., Wöstmann, B., Busche, E., Böning, K., Luthardt, R.G.: The randomized shortened dental arch study : tooth loss. J Dent Res 89, 818-822 (2010).

Weng, D., Hitomi Nagata, M. J., Bell, M., Nascimento de Melo, L. G., Bosco, A. F.: Influence of microgap location and configuration on peri-implant bone morphology in nonsubmerged implants: An experimental study in dogs. Int J Oral Maxillofac Implants 25, 540-547 (2010).

Yang, B., Barloi, A., Kern, M.: Influence of air-abrasion on zirconia ceramic bonding using an adhesive composite resin. Dent Mater 26, 44-50 (2010).

Yang, B., Wolfart, S., Li, Q, Balbosh, A., Kern, M.: Retention of prefabricated titanium dowels cemented with three luting resins. J Adhes Dent 12, 487-495 (2010).

Zhang, S., Kocjan, A., Lehmann, F., Kosmac, T., Kern, M.: Durability of resin bonding to nano- structured alumina-coated zirconia ceramic J Dent Res 89 (Spec Iss A), Abstr No 1222 (2010).

Zhang, S., Kocjan, A., Lehmann, F., Kosmac, T., Kern, M.: Influence of contamination on resin bond strength to nano-structured alumina-coated zirconia ceramic. Eur J Oral Sci 118, 396-403 (2010).

 

Zurück zum Anfang

 


2009


Abou Tara, M., Eschbach, S., Bohlsen, F., Kern, M.: Clinical outcome of metal-ceramic crowns fabricated with laser melting technology. J Dent Res 88, Abstr No 245 (2009).

Albashaireh, Z.S., Ghazal, M., Kern, M.: Effect of acid conditioning of root canal dentin on the retention of adhesively luted glass fiber-reinforced composite (FRC) posts. Am J Dent 22, 376-380 (2009).

Andreiotelli, M., Wenz, H.-J., Kohal, R.-J.: Are ceramic implants a viable alternative to titanium implants? A systematic literature review. Clin Oral Impl Res 20 (Suppl. 4), 32-47 (2009).

Azimian, F., Klosa, K., Kern, M.: Bond strength to ceramics and alloys using an experimental primer. J Dent Res 88, Abstr No 2360 (2009).

Busch R, Kern M.: Wiederherstellung der Retention bei dem schraubaktivier-baren Kugelkopfattachment Dalbo Plus. Quintessenz 60, 713-717 (2009).

Eschbach, S., Wolfart, S., Bohlsen, F., Kern, M.: Clinical evaluation of all-ceramic posterior three-unit FDPs made of In-Ceram Zirconia. Int J Prosthodont 22, 490-492 (2009).

Dimaczek, B., Eschbach, S., Kern, M.: Wiederherstellung einer Zirkonoxidkeramikbrücke nach Verblendungsfraktur mittels direkter adhäsiver Befestigung der Frakturscherbe. Quintessenz 60, 33-39 (2009).

Ghazal, M., Kern, M.: The influence of antagonistic surface roughness on the wear of human enamel and nanofilled composite resin artificial teeth. J Prosthet Dent 101, 342-349 (2009).

Ghazal, M., Kern, M.: Wear of human enamel and nano-filled composite resin denture teeth under different loading forces. J Oral Rehabil 36, 58-64 (2009).

Gu, X.-H., Mao, C.-Y., Kern, M.: Effect of different irrigation on smear layer removal after post space preparation. J Endod 55, 583-586 (2009).

Gu, X.-H., Mao, C.-Y., Liang, C., Kern, M.: Does endodontic post space irrigation affect smear layer removal and bonding effectiveness? Eur J Oral Sci, 117, 597-603 (2009).

Haaf, P., Steiner, M., Attmann, T., Pfister, G., Cremer, J., Lutter, G.: A novel pulse duplicator system: evaluation of different valve prostheses. Thorac Cardiovasc Surg 57, 10-17 (2009).

Harder, S., Kern, M.: Survival and complications of computer aided-designing and computer-aided manufacturing vs. conventionally fabricated implant-supported reconstructions: a systematic review. Clin Oral Implants Res 20, Suppl 4, 48-54 (2009).

Harder, S., Wiltfang, J., Kern M.: Prothetische Versorgung distaler Freiendsituationen mit dentalen Implantaten zur Vermeidung herausnehmbaren Zahnersatzes. Quintessenz 60, 1305-1318 (2009).

Harder, S., Wolfart, S., Eschbach, S., Kern, M.: Outcome of posterior all-ceramic inlay-retained fixed dental prostheses. J Dent Res 88, Abstr No 1638 (2009).

Harder, S., Wolfart, S., Mehl, C., Kern, M.: Performance of ultrasonic devices for bone surgery and associated intra-osseous temperature development. Int J Oral Maxillofac Implants 24, 484-490 (2009).
übersetzt ins Deutsche: Leistung von Ultraschallgeräten in der Knochenchirurgie und damit verbundene Temperaturentwicklung im Knochen. Implantol
2009;17:305-313.

Hertrampf K., Wenz H-J., Springer I., Jargot A., Koller M., Wiltfang J.: Assessing dentists' knowledge about oral cancer: Translation and linguistic validation of a standardized questionnaire from American English into German. Oral Oncol 45, 877-882 (2009).

Kern, M.: Clinical outcome of all-ceramic restorations. In Roulet J-R, Kappert HF (Hrsg): Statements diagnostics and therapy in dental medicine today and in the future. Quintessence Publ. Co. Ltd., London 2009, 195-208.

Kern, M.: Digitale Daten und CAD/CAM - bahnt sich ein globaler Wandel an? Quintessenz 60, 389 (2009).

Kern, M.: Resin Bonding to Oxide Ceramics for Dental Restorations. In Matinlinna JP, Mittal KL (Hrsg): Adhesion Aspects in Dentistry Koninklijke Brill NV, Leiden 2009, S. 75-89.

Kern, M.: Resin bonding to oxide ceramics for dental restorations. J Adhes Sci Technol 23, 1097-1111 (2009).

Kern, M.: Zahnersatz und Wahlkampf. Quintessenz 60, 997 (2009).

Kern, M., Barloi, A., Yang, B.: Surface conditioning influences zirconia ceramic bonding. J Dent Res 88, 817-822 (2009).

Klosa, K., Wolfart, S., Lehmann, F., Wenz, H.-J., Kern, M.: The effect of storage conditions, contamination modes and cleaning procedures on the resin bond strength to lithium disilicate ceramic. J Adhes Dent 11,127-135 (2009).

Lehmann, F., Kern, M.: Durability of resin bonding to zirconia ceramic using different primers. J Adhes Dent 11, 479-483 (2009).

Lehmann, K. M., Hellwig, E., Wenz, H.-J.: Zahnärztliche Propädeutik – Einführung in die Zahnheilkunde. 11. Auflage. Deutscher Zahnärzte Verlag, Köln 2009.

Luthardt, R., Tinschert, J., Pospiech, P., Reich, S., Kern, M.: Vollkeramische Restaurationen. Wissenschaftliche Mitteilung der DGZPW. Zahnärztl Mitt 63, 1186-1188 (2009).

Mehl, C., Kern, M., Freitag-Wolf, S., Wolfart, M., Brunzel, S., Wolfart, S.: Does the Oral Health Impact Profile Questionnaire measure dental appearance? Int J Prosthodont 22, 87-93 (2009).

Mitsias, M., Koutayas, S.-O., Wolfart, S., Lehmann, F., Kern, M.: Effect of zirconia abutment preparation on fracture strength of crowns. J Dent Res 88, Abstr No 1221 (2009).

Puschmann, D., Wolfart, S., Ludwig, K., Kern, M.: Load-bearing capacity of all-ceramic posterior inlay-retained fixed dental prostheses. Eur J Oral Sci 117, 312-318 (2009).

Puschmann, D., Kern, M.: Versorgung einer Einzelzahnlücke im Frontzahnbereich durch Kombination einer inflügeligen Adhäsivbrücke und eines Adhäsivattachments. Eine Falldarstellung. Quintessenz 60, 283-289 (2009).

Reich, S., Kern, M., Luthardt, R.G., Pröbster, L., Tinschert, J., Wolfart, S., Pospiech, P.: Klinische Indikation von Kronen und Teilkronen - der geschädigte Zahn. Wissenschaftliche Mitteilung der DGZPW. Dtsch Zahnärztl Z 64, 51-52 (Erratum: 69) (2009).

Reich, S., Kern, M., Luthardt, R.G., Pröbster, L., Tinschert, J., Wolfart, S., Pospiech, P.: Klinische Indikation von Kronen und Teilkronen. Wissenschaftliche Mitteilung der DGZPW. Zahnärztl Mitt 99, 50-51 (2009).

Sasse, M., Kern, M.: Clinical outcome of resin-bonded attachments for precision-retained removable dental protheses. J Dent Res 88, Abstr No 2924 (2009).

Sasse, M., Kern, M.: Vollkeramische Adhäsivbrücken – heute. ZMK Magazin 25 (10), 21-28 (2009).

Springer, I.N., Zernial, O., Warnke, P.H., Wiltfang, J., Russo, P.A., Wolfart, S.: Nasal shape and gender of the observer: implications for rhinoplasty. J Craniomaxillofac Surg 37, 3-7 (2009).

Steiner, M., Ludwig, K., Kern, M.: Fracture strength of prefabricated posterior inlay-retained fixed dental prostheses. J Dent Res 88, Abstr No 3230 (2009).

Steiner, M., Mitsias, M.E., Ludwig, K., Kern, M.: In vitro evaluation of a mechanical testing chewing simulator. Dent Mater 25, 494-499 (2009).

Walter, M.H., Weber, A., Marré, B., Gassmann, G., Gernet, W., Hannak, W.B., Boening, K.W., Hartmann, S., Gitt, I., Heydecke, G., Klein, V., Ludwig, A., Mundt, T., Werner, D., Woestmann, B., Pospiech, P.R., Reinhard, W., Gerss, J., Kern, M., Luthardt, R.G.: The German shortened dental arch study: three year results. J Dent Res 88, Abstr No 1717 (2009).

Warnke, P.H., Douglas, T., Wollny, P., Sherry, E., Steiner, M., Galonska, S., Becker, S.T., Springer, I.N., Wiltfang, J., Sivananthan, S.: Rapid prototyping: porous titanium alloy scaffolds produced by selective laser melting for bone tissue engineering. Tissue Eng Part C Methods 15, 115-24 (2009).

Wenz, H.-J., Puschmann, D., Emde, F., Lehmann, K. M.: Das Verschleißverhalten von Doppelkronen mit Spielpassung und zusätzlichem Haltelement. Quintessenz Zahntech 35, 842-851 (2009).

Wenz, H.-J., Schreiber, T., Kern, M.: Effect of astringents on the polymerization of dental impression materials. J Dent Res 88, Abstr No 3289 (2009).

Wiegemann, M., Lehmann, F.: High-throughput SEM preparation of proteinaceaous extracellular matrix. J Mater Sci 44, 3813-3818 (2009).

Wolf, K., Brunzel, S., Wolfart, S., Kern, M.: Outcome with central single implants placed under existing complete dentures. J Dent Res 88, Abstr No 2922 (2009).

Wolf, K., Ludwig, K., Hartfil, H., Kern, M.: Analysis of retention and wear of ball attachments. Quintessence Int 40, 405-412 (2009).

Wolfart, S., Brunzel, S., Kern, M.: Strategische Pfeilervermehrung mit Implantaten unter vorhandenen Doppelkronenprothesen. Quintessenz 60, 1053-1059 (2009).

Wolfart, S., Eschbach, S., Scherrer, S., Kern, M.: Clinical outcome of three-unit lithium-disilicate glass-ceramic fixed dental prostheses: Up to 8 years results. Dent Mater 25, e63-e71 (2009).

Wolfart, S., Harder, S. Eschbach, S., Lehmann, F., Kern, M.: Four-year clinical results of fixed dental prostheses with zirconia substructures (Cercon): end abutments vs cantilever design. Eur J Oral Sci 117, 741-749 (2009).

Wolfart, S., Heydecke, G., Luthardt, R.G., Gerss, J., Busche, E., Boening, K., Eschbach, S., Aggstaller, H., Freesmeyer, W.B., Jahn, F., Gitt, I., Hartmann, S., Huppertz, J., Kern, M., Klein, V., Marre, B., Mundt, T., Pospiech, P., Richter, E.-J., Wostmann, B., Walter, M.: The German shortened dental arch study: quality of life. J Dent Res 88, Abstr No 1716 (2009).

Zhang, S., Kern, M.: The role of host-derived dentinal matrix metalloproteinases in reducing dentin bonding of resin adhesives. Int J Oral Sci 1, 105-118 (2009).

 

Zurück zum Anfang

 


2008



Albashaireh, Z.S.M., Ghazal, M., Kern, M.: Effect of dentin conditioning on retention of airborne-particle-abraded, adhesively luted glass fiber- reinforced resin posts. J Prosthet Dent 100, 367-373 (2008).

Callea, S., Kern, M.: Auswahl von Modellgussklammern im Frontzahnbereich. Vergleich zwischen C-Klammer und Roach-Klammer. Quintessenz 59, 715-721 (2008).

Dimaczek, B., Kern, M.: Long-term provisional rehabilitation of function and esthetics using an extracted tooth with the immediate bonding technique. Quintessence Int 39, 283-288 (2008).

Eschbach, S., Bohlsen, F., Kern, M.: Klinische Bewährung von im Laser-Sinter-Verfahren hergestellten metallkeramischen Einzelkronen. Abstraktband auf CD. 57. Jahrestagung der DGZPW, Abstr No KV 14 (2008).

Ghazal, M., Albashaireh, Z.S., Kern, M.: The ability of different materials to reproduce accurate records of interocclusal relationships in the vertical dimension. J Oral Rehabil 35, 816-820 (2008).

Ghazal, M., Albashaireh, Z.S., Kern, M.: Wear resistance of nanofilled composite resin and feldspathic ceramic artificial teeth. J Prosthet Dent 100, 441-448 (2008).

Ghazal, M., Hedderich, J., Kern, M.: Wear of feldspathic ceramic, nano-filled composite resin and acrylic resin artificial teeth when opposed to different antagonists. Eur J Oral Sci 116, 585-592 (2008).

Ghazal, M., Kern, M.: Mounting casts on an articulator using interocclusal records. J Prosthet Dent 100, 408-409 (2008).

Ghazal M, Kern M.: Vertical Discrepancies Caused by Interocclusal Records. Influence of Loading Forces. J Dent Res 87 (Spec Iss C), Abstr No 0071 (2008).

Ghazal M, Ludwig K, Kern M.: Abrasionsfestigkeit und Härte von Kunststoffzähnen. Dtsch Zahnärztl Z 63, 424-429 (2008).

Ghazal M, Ludwig K, Kern M.: Evaluation of vertical accuracy of interocclusal recording materials. Quintessence Int 39, 727-732 (2008).

Ghazal M, Steiner M, Kern M.: Abrasionsfestigkeit von Prothesenzähnen. Quintessenz Zahntech 34, 1016-1019 (2008).

Ghazal, M., Steiner, M., Kern, M.: Wear resistance of artificial denture teeth. Int J Prosthodont 21, 166-168 (2008).

Ghazal, M., Yang, B., Ludwig, K., Kern, M.:Two-body wear of resin and ceramic denture teeth in comparison to human enamel. Dent Mater 24, 502-507 (2008).

Kern, M.: Marathonlauf mit Handikap - Leistungsorientierte Mittelvergabe in der Hochschulmedizin. Forschung & Lehre 15, 750-752 (2008).

Kern M.: Was kann ein Generalist in seiner Praxis evidenzbasiert leisten? Konventioneller Zahnersatz versus Implantologie. Quintessenz 59, 919-925 (2008).

Kern, M., Barloi, A., Yang, B.: Long-term resin bond strength to zirconia ceramic after different surface conditioning. J Dent Res 87 (Spec Iss A), Abstr No 1059 (2008).

Kern, M., Eschbach, S.: Kleben. Neue Wege in der Prothetik. Zahnärztl Mitt 98, 3392-3398 (2008).

Klosa, K., Wolfart, S., Kern, M.: Schulungsbedarf norddeutscher Zahnärzte in Bezug auf die Verklebung von Keramiken. Abstraktband auf CD. 57. Jahrestagung der DGZPW, Abstr No P31 (2008).

Kunzelmann, K.H., Kern, M., Pospiech, P., Mehl, A., Frankenberger, R., Reiss, B., Wiedhahn, K.: Vollkeramik auf einen Blick. 3. Auflage, Arbeitsgemeinschaft für Keramik in der Zahnheilkunde e.V., Ettlingen 2008.

Mehl, C., Harder, S., Kern, M., Wolfart, S.: Retrievability of implant retained crowns following cementation. Clin Oral Impl Res 19, 1304-1311 (2008).

Mehl, C., Wolfart, S., Kern, M.: Kieferorthopädische Extrusion von Zähnen mit Hilfe von Magneten. Eine Falldarstellung. Quintessenz 59, 595-604 (2008).

Mehl, C., Wolfart, S., Kern, M.: Orthodontic extrusion with magnets: A case report. Quintessence Int 39, 371-379 (2008).

Mitsias, M., Koutayas, S.-O., Wolfart, S., Lehmann, F., Kern, M.: Fracture strength of implant crowns after different zirconia abutment preparations. J Dent Res 87 (Spec Iss B), Abstr No 1211 (2008).

Quante, K., Ludwig, K., Kern, M.: Marginal and internal fit of metal-ceramic crowns fabricated with a new laser melting technology. Dent Mater 24, 1311-1315 (2008).

Schneider, C.A., Drosos, Z., Calic, I., Kern, M., Dörfer, C.E., Eberhard, J.: Marginal adaptation of adhesive systems following different cavity disinfectants. J Dent Res 87 (Spec Iss B), Abstr No 0965 (2008).

Springer, I.N., Zernial, O., Nolke, F., Warnke, P.H., Wiltfang, J., Russo, P.A., Terheyden, H., Wolfart, S.: Gender and nasal shape: measures for rhinoplasty. Plast Reconstr Surg 121, 629-637 (2008).

Steinebrunner, L., Ludwig, K., Wolfart, S., Kern, M.: Implant-abutment interface design affects fatigue and fracture strength of implants. Clin Oral Impl Res 19, 1276-1284 (2008).

Steiner, M., Kern, M.: Dreidimensionale Kraftmessung an exzentrisch belasteten Keramikkronen im Willytec-Kausimulator. Abstraktband auf CD. 57. Jahrestagung der DGZPW, Abstr No P19 (2008).

Yang, B., Lange-Jansen, H.C., Scharnberg, M., Wolfart, S., Ludwig, K., Adelung, R., Kern, M.: Influence of saliva contamination on zirconia ceramic bonding. Dent Mater 24, 508-513 (2008).

Weng, D., Nagata, M. J. H., Bell, M., Bosco, A. F., de Melo, L. G. N., Richter, E.-J.: Influence of microgap location and configuration on the periimplant bone morphology in submerged implants. An experimental study in dogs; Clin. Oral Impl. Res. 19, 1141–1147 (2008)

Wenz, H.-J., Bartsch, J., Wolfart, S., Kern, M.: Osseointegration and clinical success of zirconia dental implants. A systematic review Int J Prosthodont 21, 21-36 (2008).

Wenz, H.J., Reuter, H.-U., Hertrampf, K.: Accuracy of impressions and casts using different implant impression techniques in a multi-implant system with an internal hex connection. Int J Oral Maxillofac Implants 23, 39-47 (2008).

Wolfart, S., Brunzel, S., Braasch, K., Kern, M.: The central single implant in the edentulous mandible: Improvement of function and quality of life. A report of 2 cases. Quintessence Int 39, 541-548 (2008).

Wolfart, S., Harder, S., Eschbach, S., Kern, M.: Outcome of posterior FPDs of veneered zirconia ceramic (Cercon). J Dent Res 86, Abstr No 576 (2008).

Wolfart, S., Kern, M.: Optimierung der periimplantären Weichteilästhetik mit Provisorien. Implantol 16, 171-182 (2008).

 

Zurück zum Anfang

 


2007


Appelt, D., Ludwig, K., Uphaus, A., Kern, M.: Fracture strength of all-ceramic posterior inlay-retained fixed partial dentures (FPDs). J Dent Res 86 (Spec Iss A), Abstr No 0386 (2007).

Braasch, K., Kern, M., Brunzel, S., Wolfart, M., Caliebe, A., Wolfart, S.: Objective and subjective masticatory function after strategic implant placement. J Dent Res 86 (Spec Iss A), Abstr No 1458 (2007).

Brunzel, S., Kern, M., Braasch, K., Wolfart, M., Wolfart, S.: Tactile perception of teeth and implants in implant-tooth-supported dentures. J Dent Res 86 (Spec Iss A), Abstr No 1457 (2007).

Ebert, A., Hedderich, J., Kern, M.: Retention of zirconia ceramic copings bonded to titanium abutments. Int J Oral Maxillofac Implants 22, 921-917 (2007).

Eschbach, S., Ebert, A., Hedderich, J., Kern, M.: Retention von geklebten Zirkonoxidkeramikhülsen auf Titanimplantatpfosten. Implantol 15, 417-426 (2007).

Eschbach, S., Wolfart, S., Kern, M.: Five years outcome of FPDs made from IPS e.max press. J Dent Res 86 (Spec Iss A), Abstr No 1968 (2007).

Ghazal, M., Steiner, M., Kern, M.: Two-body wear of resin and ceramic denture teeth. J Dent Res 86 (Spec Iss A), Abstr No 0295 (2007).

Harder, S., Wolfart, S., Ludwig, K., Möller, R., Steiner, M., Kern, M.: Bone cutting performance of ultrasonic devices and associated temperature development. J Dent Res 86 (Spec Iss A), Abstr No 2914 (2007).

Kern, M.: Befestigung von Oxidkeramiken. In Tinschert J (Hrsg): Neue Oxidkeramiken und CAD/CAM-Techniken im Dentalbereich. Deutscher Ärzte-Verlag, Köln 2007, 59-63.

Kern, M., Barloi, A., Yang, B.: Resin bond strength to zirconia ceramic after different surface conditioning. J Dent Res 86 (Spec Iss A), Abstr No 1379 (2007).

Kern, M., Kerschbaum, T.: Adhäsivbrücken. Gemeinsame Stellungnahme der DGZPW und DGZMK. Dtsch Zahnärztl Z 62, 621-623 (2007).

Kern, M., Kerschbaum, T.: Adhäsivbrücken. Gemeinsame Stellungnahme der DGZPW und DGZMK. Zahnärztl Mitt 97, 60-62 (2007).

Lehmann, F., Kern, M.: Tensile bond strength of RelyX Unicem to ceramics. J Dent Res 86 (Spec Iss A), Abstr No 0829 (2007).

Mehl, C., Scheibner, S., Ludwig, K., Kern, M.: Wear of composite resin veneering materials and enamel in a chewing simulator. Dent Mater 23, 1382-1389 (2007).

Mehl, C., Wolfart, M., Wolfart, S., Kern, M.: Retrievability of implant retained crowns after cementation. J Dent Res 86 (Spec Iss A), Abstr No 2624 (2007).

Seefeld, F., Wenz, H.J., Ludwig, K., Kern, M.: Resistance to fracture and structural characteristics of different fiber reinforced post systems. Dent Mater 23, 265-271 (2007).

Quaas, A.C., Yang, B., Kern, M.: Panavia F 2.0 bonding to contaminated zirconia ceramic after different cleaning procedures. Dent Mater 23, 506-512 (2007).

Sonnenschein, A., Wenz, H.J., Lehmann, K.M.: Doppelkronenverankerter Zahnersatz nach Pfeilervermehrung durch Implantate. Quintessenz 58, 33-43 (2007).

Springer, I.N., Wannicke, B., Warnke, P.H., Zernial, O., Wiltfang, J., Russo, P.A., Terheyden, H., Reinhardt, A., Wolfart, S.: Facial attractiveness: visual impact of symmetry increases significantly towards the midline. Ann Plast Surg 59, 156-162 (2007).

Springer IN, Wannicke B, Wiltfang J, Warnke PH, Zernial O, Wolfart S (2007). Gesichtsästhetik Teil 2: Auswirkung symmetrischer und asymmetrischer Veränderungen der Orbitaregion. Mund Kiefer Gesichtschir 11, 233-237 (2007).

Springer IN, Zernial O, Wiltfang J, Warnke PH, Terheyden H, Wolfart S (2007). Gesichtsästhetik Teil 1: Die Bedeutung der Symmetrieebene des Gesichts. Mund Kiefer Gesichtschir 11, 145-151 (2007).

Steiner, M., Ludwig, K., Kern, M.: Force-profile in laboratory chewing simulation. J Dent Res 86 (Spec Iss A), Abstr No 0049 (2007).

Wenz, H.-J., Bartsch, J., Wolfart, S., Kern, M.: Osseointegration und klinischer Erfolg von dentalen Implantaten aus Zirkonoxidkeramik. Eine systematische Literaturübersicht. Implantol 15, 383-396 (2007).

Wenz, H.J., Kern, M.: Langzeitbewährung von Doppelkronen. Quintessenz Zahntech 33, 1482-1494 (2007).

Wolfart, M., Kern, M., Brunzel, S., Braasch, K., Wolfart, S.: Prosthetic complications after strategic implant placement under existing removable dentures. J Dent Res 86 (Spec Iss A), Abstr No 1348 (2007).

Wolfart, M., Lehmann, F., Wolfart, S., Kern, M.: Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods. Dent Mater 23, 45-50 (2007).

Wolfart, S., Brunzel, S., Braasch, K., Kern, M.: Das mittige Einzelzahnimplantat im zahnlosen Unterkiefer - Verbesserung von Funktion und Lebensqualität - Eine Fallpräsentation. Implantol 15, 195-204 (2007).

Wolfart, S., Eschbach, S., Kern, M.: Outcome of posterior FPDs of veneered zirconia ceramic (Cercon). J Dent Res 86 (Spec Iss A), Abstr No 0292 (2007).

Wolfart, S., Ludwig, K., Uphaus, A., Kern, M.: Fracture strength of all-ceramic posterior inlay-retained fixed partial dentures. Dent Mater 23, 1513-1520 (2007).

Wolfart, S., Weyer, N., Freitag, S., Kern, M.: Der Nachsorgebedarf prothetischer Restaurationen bei regelmäßiger Teilnahme am Recallprogramm. Dtsch Zahnärztl Z 82, 656-667 (2007).

Yang, B., Wolfart, S., Scharnberg, M., Ludwig, K., Adelung, R., Kern, M.: Influence of contamination on to zirconia ceramic bonding. J Dent Res 86, 749-753 (2007).

Yang, B., Scharnberg, M., Wolfart, S., Quaas, A.C., Ludwig, K., Adelung, R., Kern, M.: Influence of contamination on bonding to zirconia ceramic. J Biomed Mater Res B Appl Biomater 81, 283-290 (2007).

Yang, B., Wolfart, S., Ludwig, K., Kern, M.: Effect of surface treatments on bonding durability to zirconia ceramic. J Dent Res 86 (Spec Iss A), Abstr No 1378 (2007).

 

Zurück zum Anfang

 


2006


Attia, A., Abdelaziz, K.M., Freitag, S., Kern, M.: Fracture load of composite resin and feldspathic all-ceramic CAD/CAM crowns. J Prosthet Dent 95, 117-123 (2006).

Balbosh, A., Kern, M.: Effect of surface treatment on retention of glass-fiber endodontic posts. J Prosthet Dent 95, 218-223 (2006).

Brunzel, S., Kern, M., Freitag, S., Wolfart, S.: Aesthetic effect of minor changes in incisor angulation: an internet evaluation. J Oral Rehabil 33, 430-435 (2006).

Brunzel, S., Kern, M.: Resin bond durability using a protection liner for silanated ceramic. J Dent Res 85(Spec Iss B), Abstr No 0250 (2006).

Cretsi, P., Wolfart, M., Kern, M.: Wiederherstellung von Teilprothesen mittels Adhäsivattachments nach Verlust von Doppelkronenpfeilern. Quintessenz 57, 297-305 (2006).

Friedel, W., Kern, M: Fracture strength of teeth restored with all-ceramic posts and cores. Quintessence Int 37, 289-295 (2006).

Gu, X.H., Kern, M.: Fracture resistance of crowned incisors with different post systems and luting agents. J Oral Rehabil 33, 918-923 (2006).

Harder, S., Wolfart, S., Kern, M.: Einsatz eines mobilen Abstimmungs- Systems im Rahmen eines Kurses des Curriculums Implantologie. Z Zahnärztl Implantol 22, F68-72 (2006).

Kern, M.: Clinical Performance of All-ceramic Restorations. In: Mörmann WH (Hrsg): State of the Art of CAD/CAM Restorations. Quintessence Publ. Co. Ltd., London 2006, S. 47-56.

Kern, M., Bohlsen, F., Eschbach, S., Wolfart, S.: Outcome of posterior fixed partial dentures made from In-Ceram zirconia. J Dent Res 85, Abstr No 0214 (2006).

Kern, M., Lehmann, F.: Resin bonding to zirconia ceramic after the use of primers. Trans Acad Dent Mater 20, 163, Abstr No 128 (2006).

Kunzelmann, K.H., Kern, M., Pospiech, P., Mehl, A., Frankenberger, R., Reiss, B., Wiedhahn, K.: Vollkeramik auf einen Blick. Arbeitsgemeinschaft für Keramik in der Zahnheilkunde e.V., Ettlingen 2006.

Ludwig, A., Heydecke, G., Aggstaller, H., Böning, K., Busche, E., Ebenhöh, J., Eschbach, S., Gerds, T., Gitt, I., Hannak, W., Lazarek, K., Luthardt, R.G., Marré, B., Müller, F., Pospiech, P., Reinhardt, W., Schädler, M., Stark, H., Tauche, G., Wöstmann, B., Walter, M.: Einfluss unterschiedlicher prothetischer Versorgungskonzepte der verkürzten Zahnreihe auf die Zielkriterien Karies, Vitalität und Zahnverlust. 3-Jahres-Ergebnisse der Pilotphase einer multizentrischen Studie. Dtsch Zahnärztl Z 61, 650-661 (2006).

Ludwig, K., Hartfil, H., Kern, M.: Analysis of the wear and tear of ball attachments. Quintessence J Dent Technol 4, 1, 46-55 (2006).

Ludwig, K., Hartfil, H., Kern, M.: Analyse de l´usure et de la rupture des attachements sphériques. Quintessence J Alternatives 30, 63-70 (2006).

Ludwig, K., Cretsi, X., Kern, M.: In-vitro-Untersuchung zu Abzugskräften von. Kugelkopf-Attachments bei Implantatdivergenzen. Dtsch Zahnärztl Z 61, 142-146 (2006).

Mehl, C., Wolfart, M., Brunzel, S., Kern, M., Wolfart, S.: Does the oral health impact profile measure dental appearance? J Dent Res 85(Spec Iss B), Abstr No 0790 (2006).

Staszyk, C., Lehmann, F., Bienert, A., Ludwig, K. Gasse, H.: Measurement of masticatory forces in the horse. Pferdeheilkunde 22, 12 - 16 (2006).

Warnke PH, Springer IN, Acil Y, Julga G, Wiltfang J, Ludwig K, Russo PA, Sherry E, Sivananthan S, Hedderich J, Terheyden H: The mechanical integrity of in vivo engineered heterotopic bone. Biomater 27, 1081-1087 (2006).

Warnke, P.H., Wiltfang, J., Springer, I., Acil, Y., Bolte, H., Kosmahl, M., Russo, P.A., Sherry, E., Lutzen, U., Wolfart, S., Terheyden, H.: Man as living bioreactor: fate of an exogenously prepared customized tissue-engineered mandible. Biomater 27, 3163-3167 (2006).

Wegner, P.K., Freitag, S., Kern, M.: Survival rate of endodontically treated teeth with posts after prosthetic restoration. J Endod 32, 928-931 (2006).

Wolfart, M., Wolfart, S., Eberhard, J., Acil, Y., Brunzel, S., Callea, S., Kern, M.: Quantification of the inflammatory reaction to all-ceramic and metal-ceramic crowns. J Dent Res 85(Spec Iss B), Abstr No 0601 (2006).

Wolfart M., Wolfart S., Kern M.: Retention forces and seating discrepancies of implant-retained castings after cementation. Int J Oral Maxillofac Implants 21, 519-525 (2006)

Wolfart S, Kern M: A new design for all-ceramic inlay-retained FPDs. A report of two cases. Quintessence Int 37, 27-33 (2006).

Wolfart, S., Kern, M.: Ein neues Design vollkeramischer Inlaybrücken. Zwei Fallberichte. Quintessenz 57, 619-625 (2006).

Wolfart, S., Quaas, A.C., Freitag, S., Kropp, P., Gerber, W.D., Kern, M.: General well-being as an important co-factor of self-assessment of dental appearance. Int J Prosthodont 19, 449-454 (2006).

Wolfart, S., Quaas, A.C., Freitag, S., Kropp, P., Gerber, W.D., Kern, M.: Subjective and objective perception of upper incisors. J Oral Rehabil 33, 489-495 (2006).

Wolfart, S., Wolfart, M., Braasch, K., Brunzel, S., Kern, M.: Strategic implant placement under removable dentures improves quality of life. J Dent Res 85(Spec Iss B), Abstr No 0113 (2006).

Yang, B., Ludwig, K., Adelung, R., Kern, M.: Micro-tensile bond strength of three luting resins to human regional dentin. Dent Mater 22, 45-56 (2006).

Yang B., Scharnberg M., Wolfart S., Quaas A., Ludwig K., Adelung R., Kern M.: Influence of contamination on bonding to zirconia ceramic. J Biomed Mater Res B Appl Biomater; 81B (2) 283-290 (2006)

Yang, B., Wolfart, S., Kern, M.: Retention of titanium posts luted with 4-META-containing resin cements. J Dent Res 85(Spec Iss B), Abstr No 0736 (2006).

 

Zurück zum Anfang

 


2005


Balbosh, A., Ludwig, K., Kern, M.: Comparison of titanium dowel retention using four different luting agents. J Prosthet Dent 94, 227-233 (2005).

Braasch, K., Wolfart, S., Steinebrunner, L., Kern, M.: Precision of various mechanical torque devices and torque settings. J Dent Res 84, Abstr No 3293 (2005).

Brunzel, S., Yang, B., Wolfart, S., Kern, M.: Tensile bond strength of a so-called self-adhesive resin to dentin. J Dent Res 84, Abstr No 2560 (2005).

Cretsi, P., Hedderich, J., Freitag, S., Kern, M.: Movement and tipping of teeth after loss of first molars. J Dent Res 84, Abstr No 2904 (2005).

Eschbach, S., Koutayas, S., Kern, M.: Fracture strength of resin-bonded all-ceramic fixed partial dentures. J Dent Res 84, Abstr No 0430 (2005).

Helal, M., Kern, M., Sanad, M.E., Ludwig, K.: Retention of two clasp designs in a long-term in-vitro study. J Dent Res 84, Abstr No 2916 (2005).

Kern, M.: Clinical long-term survival of two-retainer and single-retainer all-ceramic resin-bonded fixed partial dentures. Quintessence Int 36, 141-147 (2005).

Kern, M.: Einflügelige Adhäsivbrücken und Adhäsivattachments - Innovation mit Bewährung. Zahnärztl Mitt 95, 2878-2884 (2005)

Kern, M.: Klinische Langzeitbewährung von zwei- und einflügeligen Adhäsivbrücken aus Vollkeramik. Quintessenz 56, 231-239 (2005).

Ludwig, K.: Lexikon der Zahnmedizinischen Werkstoffkunde. 1. Auflage. Quintessenz, Berlin 2005.

Ludwig, K., Hartfil, H., Kern, M.: Untersuchung zum Verschleißverhalten von Kugelkopfattachments. Quintessenz Zahntech 31, 1074-1083 (2005).

Ludwig, K., Uphaus, A., Kern, M.: Fracture strength of all-ceramic posterior inlay-retained fixed partial dentures (FPDs). J Dent Res 84, Abstr No 0428 (2005).

Quaas, A.C., Heide, S., Freitag, S., Kern, M.: Influence of metal cleaning methods on the resin bond strength to NiCr alloy. Dent Mater 21, 192-200 (2005).

Quaas, A.C., Kern, M.: Reparatur von Kronen- und Brückenprovisorien. Klinisches Vorgehen step by step. Quintessenz 56, 39-46 (2005).

Quaas, A.C., Yang, B., Kern, M.: Resin bonding to contaminated zirconia ceramic after different cleaning procedures. J Dent Res 84, Abstr No 0228 (2005).

Steinebrunner, L., Bößmann, K., Kern, M.: Implantat-Abutment-Verbindungen - Präklinische Testmethoden. Implantol 13, 145-160 (2005)

Steinebrunner, L., Wolfart, S., Bossmann, K., Kern, M.: In vitro evaluation of bacterial leakage along the implant-abutment interface of different implant systems. Int J Oral Maxillofac Implants 20, 875-881 (2005).

Strub, J.R., Türp, J.C., Witkowski, S., Hürzeler, M.B., Kern, M.: Curriculum Prothetik I. Geschichte - Grundlagen - Behandlungskonzept - Vorbehandlung. 3. Auflage. Quintessenz, Berlin 2005.

Strub, J.R., Türp, J.C., Witkowski, S., Hürzeler, M.B., Kern, M.: Curriculum Prothetik II. Artikulatoren - Ästhetik - Werkstoffkunde - Festsitzende Prothetik. 3. Auflage. Quintessenz, Berlin 2005.

Strub, J.R., Türp, J.C., Witkowski, S., Hürzeler, M.B., Kern, M.: Curriculum Prothetik III. Kombinierte und abnehmbare Prothetik - Implantologie - Nachsorge - Psychologie. 3. Auflage. Quintessenz, Berlin 2005.

Terheyden, H., Kern, M.: Resektive Therapie der Periimplantitis in Kombination mit Implantatglättung und Schaffung befestigter Gingiva. Implantol 13, 269-277 (2005).

Wolfart, S., Bohlsen, F., Wegner, S.M., Kern, M.: A preliminary prospective evaluation of all-ceramic crown-retained and inlay-retained fixed partial dentures. Int J Prosthodont 18, 497-505 (2005).

Wolfart, S., Heydecke, G., Luthardt, R.G., Marre´, B., Freesmeyer, W.B., Stark, R., Wöstmann, B., Mundt, T., Pospiech, T., Jahn, F., Gitt, I., Schädler, B., Aggstaller, H., Talebpur, F., Busche, E., Bell, M.: Effects of prosthetic treatment for shortened dental arches on oral health-related quality of life, self-reports of pain and jaw disability. Results from the pilot-phase of a randomized multicenter trial. J Oral Rehabil 32:815-822 (2005).

Wolfart, S., Thormann, H., Freitag, S., Kern, M.: Assessment of dental appearance following changes in incisor proportions. Eur J Oral Sci 113, 159-165 (2005).

Wolfart, S., Thormann, H.-K., Freitag, S., Kern, M.: Assessment of dental appearance following changes in incisor proportions. J Dent Res 84, Abstr No 0224 (2005).

Wolfart, S.: Digital Imaging - ein diagnostisches Hilfsmittel zur Festlegung des Behandlungsziels bei komplexen Sanierungen. Implantologie 13, 25-36 (2005).

Yang, B., Adelung, R., Ludwig, K., Pashley, D.H., Kern, M.: Effect of structural change of collagen fibrils on the durability of dentin bonding. Biomater 26, 5021-5031 (2005).

 

Zurück zum Anfang


2004


Attia, A., Kern, M.: Fracture strength of all-ceramic crowns luted using two bonding methods. J Prosthet Dent 91, 247-252 (2004).

Attia, A., Kern, M.: Influences of cyclic loading and luting agents on the fracture load of two all-ceramic crown systems. J Prosthet Dent 92, 551-566 (2004).

Blatz, M.B., Sadan, A., Kern, M.: Adhäsive Befestigung hochfester Vollkeramikrestaurationen. Quintessenz 55, 33-41 (2004).

Blatz, M.B., Sadan, A., Kern, M.: Ceramic restorations. Compend Contin Educ Dent 25, 412, 414, 416 passim (2004).

Bohlsen, F., Wegner, S., Wolfart, S., Kern, M.: Clinical outcome of a new all-ceramic system for fixed partial dentures. J Dent Res 83, Abstr No 4076 (2004).

Bohlsen, F., Wolfart, S., Wegner, S., Kern, M.: Klinische Bewährung von vollkeramischen Brücken aus In-Ceram Zirconia im Seitenzahnbereich. Abstraktband. 53. Jahrestagung der Deutschen Gesellschaft für Zahnärztliche Prothetik und Werkstoffkunde, Kiel 2004, S. 29, Abstrakt KV #25.

Brunzel, S., Wolfart, S., Freitag, S., Kern, M.: Esthetic influence of minor changes in incisor angulation. An Internet evaluation. J Dent Res 83, Abstr No 1480 (2004).

Cretsi, P., Hedderich, J., Kern, M.: Wanderungen und Kippungen von Zähnen nach Verlust des ersten Molaren. Abstraktband. 53. Jahrestagung der Deutschen Gesellschaft für Zahnärztliche Prothetik und Werkstoffkunde, Kiel 2004, S. 15-16, Abstrakt KV #5.

Ebert, A., Hedderich, J., Kern, M.: Bond strength of zirconia ceramic copings to titanium abutments. J Dent Res 83, Abstr No 2837 (2004).

Gente, M., Wenz, H.-J.: Prothetische und epithetische Behandlung des bestrahlten Patienten. In: Kielbassa, A.M. (Hrsg.): Strahlentherapie im Kopf- und Halsbereich - Implikationen für Zahnärzte, HNO-Ärzte und Radiotherapeuten, Schlütersche Verlagsgesellschaft, Hannover 2004, S. 101-115.

Hagenmüller, M., Wolfart, S., Kern, M.: Retention forces and seating discrepancies after cementation of implant-supported castings. J Dent Res 83, Abstr No 3087 (2004).

Hertrampf, K., Wenz, H.-J., Lehmann, K.M., Lorenz, W., Koller, M. Quality of Life of Patients with Maxillofacial Defects After Treatment for Malignancy. Int J Prosthodont 17, 657-665 (2004).

Hummel, M., Kern, M.: Durability of the resin bond strength to the alumina ceramic Procera. Dent Mater 20, 498-508 (2004).

Kern, M.: Nichts ist beständiger als der Wandel (Editorial). Implantologie 12, 113 (2004).

Kern, M.: Outcome of all-ceramic resin-bonded fixed partial dentures after five years. J Dent Res 83, Abstr No 4077 (2004).

Kern, M.: Zahnersatz in aller Munde (Editorial). Quintessenz 55, 1055 (2004).

Steinebrunner, L., Wolfart, S., Bößmann, K., Ludwig, K., Kern, M.: Fatigue strength compared to microleakage in different implant-abutment interfaces. J Dent Res 83, Abstr No 3072 (2004).

Wang, H., Springer, I.N.G., Schildberg, H., Açil, Y., Ludwig, K., Rueger, D., Terheyden, H.: Carboxymethylcellulose stabilised collagenous rhOP-1 device - a novel carrier biomaterial for the repair of mandibular continuity defects. J Biomed Mater Res 68A(2): 219 – 226 (2004).

Wegner, S., Wolfart, S., Kern, M.: In vivo study of the marginal integrity of composite resin buildups after full crown preparation. J Adhes Dent 6, 151-155 (2004).

Wolfart, S., Brunzel, S., Freitag, S., Kern, M.: Assessment of dental appearance following changes in incisor angulation. Int J Prosthodont 17, 150-154 (2004).

Wolfart, S., Kern, M.: Prothetische Konzepte bei reduziertem Lückengebiss an deutschen und schweizer Hochschulen. Dtsch Zahnärztl Z 59, 322-327 (2004).

Wolfart, S., Luthardt , R.G., Marré, B., Freesmeyer, W.B., Stark, H., Heydecke, G., Wöstmann, B., Mundt, T., Pospiech, P., Jahn, F., Gitt, I., Schädler, M., Aggstaller, H., Talebpur, F., Busche, E., Bell, M.: Messung der mundgesundheitsbezogenen Lebensqualität bei unterschiedlichen prothetischen Versorgungen der verkürzten Zahnreihe in einer Multicenter-Pilot-Studie. Abstraktband. 53. Jahrestagung der Deutschen Gesellschaft für Zahnärztliche Prothetik und Werkstoffkunde, Kiel 2004, S. 13-14, Abstrakt KV #2.

Wolfart, S., Menzel, H., Kern, M.: Inability to relate tooth forms to face shape and gender. Eur J Oral Sci 112, 471-476 (2004).

Wolfart, S., Quaas, A.C., Freitag, S., Kern, M.: A comparison between subjective and objective perception of dental appearance. J Dent Res 83, Abstr No 389 (2004).

Wolfart, S., Wegner, S.M., Kern, M.: Comparison of using calcium hydroxide or a dentine primer for reducing dentinal pain following crown preparation: a randomized clinical trial with an observation time up to 30 months. J Oral Rehabil 31, 344-50 (2004).

Yang, B., Adelung, R., Ludwig, K., Kern, M.: Bonding durability of two resin cements to human coronal dentin. J Dent Res 83, Abstr No 1537 (2004).

 

Zurück zum Anfang

 


2003


Attia, A., Kern, M.: Fracture strength of composite and all-ceramic CAD-CAM crowns. J Dent Res 82: B-181, Abstr No 1356 (2003).

Attia, A., Kern, M.: Influence of cyclic loading and luting agents on the fracture strength of two all-ceramic crowns. J Dent Res 82: B-45, Abstr No 264 (2003).

Bani Sakher, A., Ludwig, K., Kern, M.: Retention of pre-fabricated titanium posts cemented with three different cements. J Dent Res 82: B-319, Abstr No 2468 (2003).

Blatz, M.B., Sadan, A., Kern, M.: Adhesive cementation of high-strength ceramic restorations: Clinical and laboratory guidelines. Quintessence Dent Technol 26, 47-56 (2003).

Blatz, M.B., Sadan, A., Kern, M.: Resin-ceramic bonding: A review of the literature. J Prosthet Dent 89, 268-274 (2003).

Bohlsen, F., Kern, M.: Clinical outcome of glass-fiber reinforced crowns and fixed partial dentures. A three-year retrospective study. Quintessence Int 34, 493-496 (2003).

Edelhoff, D., Heidemann, D., Kern, M., Weigl, P.: Aufbau endodontisch behandelter Zähne. Gemeinsame Stellungnahme der DGZMK, DGZPW und DGZ.Zahnärztl Mitt 93, 954-956 (2003).

Gu, X.-H., Kern, M.: Marginal discrepancies and leakage of all-ceramic crowns: Influence of luting agents and aging conditions. Int J Prosthodont 15, 109-116 (2003).

Kern, M.: Prophylaxeorientierte rekonstruktive Konzepte. In: Roulet J.-F., Zimmer, S. (Hrsg.): Prophylaxe und Präventivmedizin, Farbatlanten der Zahnmedizin Band 16, Georg Thieme Verlag, Stuttgart 2003, S. 125-138.

Ludwig, K., Kresse, T., Kern, M.: Friction and wear of extracoronal attachments with and without bracing units. J Dent Res 82: B-50, Abstr No 300 (2003).

Ludwig, K., Kresse, T., Kern, M.: In-vitro-Untersuchung zum Verschleißverhaltenextrakoronaler Geschiebe mit und ohne Schubverteiler. Dtsch Zahnärztl Z, 58, 597-600 (2003)

Ludwig, K., Wall, G.: Dentallegierungen. In: Wall, G., Hermann, G. (Hrsg.). Das Zahnärztliche Praxislabor. Spitta Balingen 2003

Steinebrunner, L.: Aktuelle Aspekte bei der Kieferrelationsbestimmung, QuintessenzTeam-Journal 33, 7-17 (2003).

Steinebrunner, L., Wolfart, S., Bößmann, K., Ludwig, K., Kern, M.: Microleakage of the interface between implant and abutment of five implant systems during a five-year simulation of dynamic loading in a chewing simulator. J Dent Res 82: B-45, Abstr No 260 (2003).

Terheyden, H., Wang, H., Warnke, P. H., Springer, I., Erxleben, A., Ludwig, K., Rueger, D. C.: Acceleration of callus maturation using rhOP-1 in mandibular distraction osteogenesis in a rat model. Int. J. Maxillofac. Surg. 32, 528-533 (2003)

Wolfart, S., Brunzel, S., Freitag, S., Kern, M.: Esthetic effects of minor changes in tooth position for anterior restorations - A comparison of the results from different test methods. J Dent Res 82: B-248, Abstr No 1901 (2003).

Wolfart, S., Linnemann, J., Kern, M.: Crown retention with use of different sealing systems on prepared dentine. J Oral Rehabil 30, 1053-1061 (2003).

Wolfart, S., Wegner, S.M., Al-Halabi, A., Kern, M.: Clinical evaluation of marginal fit of a new experimental all-ceramic system before and after cementation. Int J Prosthodont 16, 587-592 (2003).

 

Zurück zum Anfang

 


2002



Blatz, M.B., Sadan, A., Kern, M.: Adhäsive Befestigung silikatkeramischer Restaurationen. Quintessenz 53, 827-835 (2002).

Blatz, M.B., Sadan, A., Kern, M.: Bonding to silica based ceramics: Clinical and laboratory guidelines. Quintessence Dent Technol 25, 54-62 (2002).

Bohlsen, F., Kern, M.: Clinical outcome of glass-fiber- reinforced crowns and fixed partial dentures. J Dent Res 81, A- 153, Abstr No 1069 (2002).

Friedel, W., Wegner, S.M., Kern, M.: Survival rate of abutment teeth restored with posts and cores. A retrospective clinical study. J Dent Res 81, A-152, Abstr No 1065 (2002).

Friederich, R., Kern, M.: Resin bond strength to densely sintered alumina ceramic. Int J Prosthodont 15, 333-338 (2002).

Gu, X.-H., Kern, M.: Marginal discrepancies and microleakage of all-ceramic crowns. Adhes Dent 19, 275, Abstr No O-01 (2002).

Jeong, S.-M., Ludwig, K., Kern, M.: Investigation of the fracture resistance of three types of zirconia posts in all-ceramic post-and-core restorations. Int J Prosthodont 15, 154-158 (2002).

Hummel, M., Wegner, S.M., Kern, M.: Long-term resin bond strength to Procera ceramic. J Dent Res 81, A-35, Abstr No 0052 (2002).

Kern, M.: Alter, Lebensqualität und Zahnmedizin (Editorial). Quintessenz 53, 319 (2002).

Kern, M.: Bonding to high-strength ceramics. Adhes Dent 19, 242, Abstr No S-05 (2002).

Kern, M., Tomic, M.: Clinical outcome of all-ceramic resin- bonded fixed partial dentures. J Dent Res 81, A-152, Abstr No 1066 (2002).

Koutayas, S.O., Kern, M., Ferraresso, F., Strub, J.R.: Influence of framework design on the fracture strength of mandibular anterior all-ceramic resin-bonded fixed partial dentures. Int J Prosthodont 15, 223-229 (2002).

Lehmann, F., Kern, M.: Tensile bond strength of composite resins to zirconia ceramic with different surface conditions. J Dent Res 81, A-242, Abstr No 1855 (2002).

Ludwig, K., Sassenscheid, S., Kern, M.: Untersuchungen zur Festigkeit des Klebeverbundes zu Wurzelstiften aus Zirkonoxidkeramik. Abstractband, 51. Jahrestagung der Deutschen Gesellschaft für Zahnärztliche Prothetik und Werkstoffkunde, Dresden 2002, S. 77, Abstr No 63.

Stark, H., Kern, M.: Die prothetische Versorgung des alten Menschen. Quintessenz 53, 359-371 (2002).

Wegner, S.M., Gerdes, W., Kern, M.: Effect of different artificial aging conditions on ceramic/composite bond strength. Int J Prosthodont 15, 267-272 (2002).

Wegner, S.M., Wolfart, S., Kern, M.: Clinical evaluation of a new all-ceramic system for fixed partial dentures (FPDs). J Dent Res 81, A-325, Abstr No 2583 (2002).

Wegner, S., Wolfart, S., Kern, M.: Erste klinische Erfahrungen mit vollkeramischen Inlaybrücken. Abstractheft, 31. Tagung der Arbeitsgemeinschaft Dentale Technologie, Sindelfingen, S. 22-23, Abstr No 11.

Wolfart, S., Al-Halabi, A., Wegner, S.M., Kern, M.: Clinical evaluation of the marginal fit of a new experimental all-ceramic system. J Dent Res 81, A-402, Abstr No 3245 (2002).

Wolfart, S., Brunzel, S., Kern, M.: Untersuchungen zur ästhetischen Wirkung von leichten Zahnstellungsveränderungen bei Frontzahnrestaurationen. Abstractband, 51. Jahrestagung der Deutschen esellschaft für Zahnärztliche Prothetik und Werkstoffkunde, Dresden 2002, S. 21, Abstr No 7.

 

Zurück zum Anfang

 


2001


Attia, A., Kern, M., Khamis, A.: Fracture strength of all-ceramic crowns luted with two bonding procedures. J Dent Res 80, 651, Abstr No 999 (2001).

Attia, A., Kern, M.: Marginal and internal fit of two all-ceramic crown systems. J Dent Res 80, 119, Abstr No 122 (2001).

Bohlsen, F., Kern, M.: Klinische Bewährung von glasfaserverstärkten Kronen und Brücken. Abstractheft, 50. Jahrestagung der Deutschen Gesellschaft für Zahnärztliche Prothetik und Werkstoffkunde, Bad Homburg 2001, S. 22.

Frenzel, E., Kern, M.: Tensile bond strength of new Panavia F to tooth structure. J Dent Res 80, 706, Abstr No 1439 (2001).

Friedel, W., Kern, M.: Fracture strength of restorations with all-ceramic posts and cores. J Dent Res 80, 706, Abstr No 1438 (2001).

Foussekis, K., Kern, M., Ludwig, K.: Vergleichende Untersuchung zur Bruchfestigkeit und Reparaturfähigkeit von direkten Brückenprovisorien. Dtsch Zahnärztl Z 56, 612- 615 (2001).

Foussekis, K., Kern, M.: Vergleichende Untersuchungen zur Bruchfestigkeit und Reparaturfähigkeit von Brückenprovisorien. Abstractheft, 50. Jahrestagung der Deutschen Gesellschaft für Zahnärztliche Prothetik und Werkstoffkunde, Bad Homburg 2001, S. 61.

Jeong, S.M., Jeong, J.H., Kang, D.W., Ludwig, K., Kern, M.: Evaluation of the fracture resistance of zirconia posts in all-ceramic post and core restorations. J Dent Res 80, 706, Abstr No 1436 (2001).

Jordan, T., Kern, M.: Vergleich eines computergestützten Registrierungssystems mit dem klassischen Stützstiftregistrat nach Gerber. Dtsch Zahnärztl Z 56, D14 (2001).

Kern, M.: Resin-bonded attachments for precision- retained removable partial dentures. J Prosthodont 10, Abstr No 1, 187 (2001).

Kern, M., Grundke, P.: Resin bond durability to CoCr alloy achieved by silica coating methods. J Dent Res 80, 790, Abstr No 2112 (2001).

Kern, M.: Telescopic and conical crown retained overdentures. Z Zahnärztl Implantol, Supplement 2001, Abstracts 9th International Congress on Reconstructive Preprosthetic Surgery, S 13.

Kern, M., Wagner, B.: Periodontal findings in patients 10 years after insertion of removable partial dentures. J Oral Rehabil 28, 991-997 (2001).

Ludwig, K., Jeong, S.-M., Kern, M.: Untersuchungen zur Bruchfestigkeit von vollkeramischen Stiftkernaufbauten. Abstractheft, 50. Jahrestagung der Deutschen Gesellschaft für Zahnärztliche Prothetik und Werkstoffkunde, Bad Homburg 2001, S. 56.

Ludwig, K., Kern, M., Klopfer, S.: Fracture strength of all-ceramic anterior fixed partial dentures. J Dent Res 80, 651, Abstr No 998 (2001).

Walter, M., Behneke, N., Biffar, R., Böning, K., Freesmeyer, W.B., Kern, M., Köpcke, W., Pospiech, P., Reiber, T., Reinhardt, W., Richter, E.-J., Stark, H., Wöstmann, B., Luthardt, R.G., Marré, B.: Multizentrische Studie "Verkürzte Zahnreihe". Vorhaben und Design. Abstractheft, 50. Jahrestagung der Deutschen Gesellschaft für Zahnärztliche Prothetik und Werkstoffkunde, Bad Homburg 2001, S. 94-95.

Walter, M., Böning, K., Butz, F., Hannak, W., Kern, M., Köpcke, W., Luthard, R.G., Marré, B., Mundt, T., Pospiech, P., Reiber, T., Reinhardt, W., Richter, E.-J., Schädler, M., Severin, R.M., Wöstmann, B.: The randomized multicenter study of prosthetic treatment options of the shortened dental arch. In: Merker, N., Göpfert, P., Kirch, W. (Hrsg.): Public Health Research and Practice: Report of the Public Health Research Association Saxony 2000-2001, Band III, Roderer Verlag, Regensburg 2001, S. 289- 301.

Wegner, S., Gerdes, W., Kern, M.: Influence of storage conditions on the resin bond strength to zirconia ceramic. J Dent Res 80, 790, Abstr No 2111 (2001).

Wolfart, S., Linnemann, J., Kern, M.: Crown retention with use of different sealing systems on prepared dentin. J Dent Res 80, 551, Abstr No 196 (2001).

 

Zurück zum Anfang


2000


Antoniadou, M., Kern, M., Strub, J.R.: Effect of a new metal primer on the bond strength between a resin cement and two high-noble alloys. J Prosthet Dent 84, 554-560 (2000).

Frenzel, E., Kern, M.: Klebeverbund von dual- und autopolymerisierenden, phosphatmonomerhaltigen Kompositklebern zu hochgoldhaltigen Legierungen. Abstractheft, 49. Jahrestagung der Deutschen Gesellschaft für Zahnärztliche Prothetik und Werkstoffkunde, Berlin 2000, S. 35-36.

Kern, M., Schuster, S.: Resin bond strength to CoCr alloy when using intraoral sandblasting devices. J Dent Res 79, 614, Abstr No 3768 (2000).

Koutayas, S.O., Kern, M., Ferraresso, F., Strub, J.R.: Influence of design and mode of loading on the fracture strength of all-ceramic resin-bonded fixed partial dentures. An in-vitro study in a dual-axis chewing simulator. J Prosthet Dent 83, 540-547 (2000).

Ludwig, K., Gips. In: Stemmann, H. (Hrsg.). Die richtige Abrechnung des Zahntechnikers. Spitta Balingen 2000

Ludwig, K., Kubick, S., Klopfer, S.: In-vitro investigations on fracture strength of anterior bridges of Empress, Empress2 and new all-ceramic materials. In: Höland, W., Schweiger, M., Rheinberger, V. (Hrsg.), Proceeding of the International Symposium on Crystallization in Glasses and Liquids. Glastech. Ber. Glass Sci. Technol. 73 C1, Frankfurt (2000)

Marxkors, S., Ludwig, K.: Klinisch - technische Untersuchung zur Genauigkeit von Brückenzahnersatz. 49. Jahrestagung der Deutschen Gesellschaft für Zahnärztliche Prothetik und Werkstoffkunde, Berlin 2000, S. 69.

Terheyden, H., Lee, U., Ludwig, K., Kreusch, T., Hedderich, J.: Sterilization of elastic ligatures for interoperative mandibulomaxillary immobilization. Br J Oral Maxillofac Surg 38, 299 - 304, (2000)

Wagner, B., Kern, M.: Clinical evaluation of removable partial dentures 10 years after insertion. Success rates, hygienic problems and technical failures. Clin Oral Investig 4, 74-80 (2000).

Wegner, S.M., Kern, M.: In-vivo study of the marginal integrity of composite resin built-ups after full crown preparation. J Dent Res 79, 614, Abstr No 3767 (2000).

Wegner, S., Kern, M.: Long-term resin bond strength to zirconia ceramic. J Adhes Dent 2, 139-145 (2000).

Wolfart, S., Kern, M.: Are calcium hydroxide suspension and dentin primer effective in reducing tooth sensitivity after full crown preparation? J Dent Res 79, 518, Abstr No 3000 (2000).

Wolfart, S., Kern, M.: Optimale Einstellung der Konushaftung durch Einbringen eines okklusalen Stopps. Ein einfaches klinisches Verfahren bei zu stark haftenden Teilprothesen. Quintessenz 51, 127-136 (2000).

 

Zurück zum Anfang

 


1999


Antoniadou, M., Kern, M., Strub, J.R.: Bond strength to high precious alloys using a new metal primer. J Dent Res 78, 530, Abstr No 3394 (1999).

Kern, M.: Doppelkronensysteme. In: Freesmeyer, W.B. (Hrsg.): Klinische Prothetik. Band 2. Herausnehmbarer Zahnersatz. Hüthig, Heidelberg 1999, S. 100-146.

Kern, M., Simons, K.: Adhäsivattachments zur Verankerung abnehmbarer Teilprothesen. Zahnärztl Mitt 89, 1232-1237 (1999).

Kern, M., Strub, J.R., Lü, X.-Y.: Wear of composite resin veneering materials in a dual-axis chewing simulator. J Oral Rehabil 26, 372-378 (1999).

Koutayas, S.O., Kern, M.: All-ceramic post and cores. State of the art. Quintessence Int 30, 383-392 (1999).

Koutayas, S.O., Kern, M., Ferraresso, F., Strub, J.R.: Influence of framework design on the load-bearing capacity of lower anterior all-ceramic resin-bonded fixed partial dentures. J Dent Res 78, 219, Abstr No 905 (1999).

Ludwig, K., Dentallegierungen. In: Heinenberg, J. (Hrsg.). Innovation für die Zahnheilkunde. Spitta Balingen 1999

Ludwig, K.: Keramik- oder Kunststoffverblendungen. Zahnärztl Mitt 89, 1226-1231 (1999)

Ludwig, K., Kubick, S.: Vergleichende Untersuchungen zur Bruchfestigkeit von vollkeramischen Frontzahnbrücken, 48. Jahrestagung der Deutschen Gesellschaft für Zahnärztliche Prothetik und Werkstoffkunde, S. 4, Würzburg (1999)

Ludwig, K., Kubick, S.: Vergleichende Untersuchungen zur Bruchfestigkeit von vollkeramischen Frontzahnbrücken. Dtsch Zahnärztl Z 54, 711 (1999).

Simons, K., Wolfart, S., Kern, M.: Klinische (Kurzzeit-)Erfahrungen mit Kompositstumpfaufbauten. Abstractheft, 48. Jahrestagung der Deutschen Gesellschaft für Zahnärztliche Prothetik und Werkstoffkunde, Würzburg 1999, S. 37.

Simons, K., Wolfart, S., Kern, M.: Klinische (Kurzzeit-)Erfahrungen mit Kompositstumpfaufbauten. Dtsch Zahnärztl Z 54, 715-717 (1999).

Strub, J.R., Türp, J., Wittkowski, S., Hürzeler, M.B., Kern, M.: Curriculum Prothetik. Band I. Geschichte - Grundlagen - Behandlungskonzept - Vorbehandlung. 2., überarbeitete und erweiterte Auflage, Quintessenz, Berlin 1999.

Strub, J.R., Türp, J., Wittkowski, S., Hürzeler, M.B., Kern, M.: Curriculum Prothetik. Band II. Artikulatoren - Ästhetik - Werkstoffkunde - Festsitzende Prothetik. 2., überarbeitete und erweiterte Auflage, Quintessenz, Berlin 1999.

Strub, J.R., Türp, J., Wittkowski, S., Hürzeler, M.B., Kern, M.: Curriculum Prothetik. Band III. Kombinierte und abnehmbare Prothetik - Implantologie - Nachsorge - Psychologie. 2., überarbeitete und erweiterte Auflage, Quintessenz, Berlin 1999.

Terheyden, H., Mühlendyck, C., Sprengel, M., Ludwig, K., Härle, F.: Self-adapting washer system for lag screw fixation of mandibular fractures. Part II: in vitro mechanical characterization of 2.3 and 2.7 mm lag screw prototypes and vivo removal torque after healing. J Craniomaxillofac Surg 27, 243 (1999).

Wegner, S., Kern, M.: Long-term resin bond strength to zirconia ceramic. J Dent Res 78, 205, Abstr No 794 (1999).
 
 

Zurück zum Anfang



1998


Kern, M.: Adhäsivattachments zur Verankerung von abnehmbarem Zahnersatz. Siebenjährige Bewährung bei einer jugendlichen Patientin. Quintessenz 49, 7-12 (1998).

Kern, M., Friederich, A.R.: Beständigkeit des Klebeverbundes zu dichtgesinterter, reiner Aluminiumoxidkeramik. Abstract-Band, 47. Jahrestagung der Deutschen Gesellschaft für Zahnärztliche Prothetik und Werkstoffkunde, Leipzig 1998.

Kern, M., Simon, M.H.P., Strub, J.R.: Erste klinische Erfahrungen mit Wurzelstiften aus Zirkonoxidkeramik. Dtsch Zahnärztl Z 53, 266-268 (1998).

Kern, M., Strub, J.R.: Bonding to alumina ceramic in restorative dentistry over up to five years. J Dent 26, 245-249 (1998).

Kern, M., Strub, J.R., Lü, X.-Y.: Wear of composite resin veneering materials in a newly developed chewing simulator. J Dent Res 77, 901, Abstr No 2154 (1998).

Kern, M., Wegner, S.M.: Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 14, 64-71 (1998).

Koutayas, S.O., Kern, M., Strub, J.R.: Influence of design and loading mode on the fracture strength of all-ceramic resin-bonded FPDs. J Dent Res 77, 778, Abstr No 1173 (1998).

Ludwig, K., Behrens, E.: Untersuchungen zur Verbundfestigkeit eines innovativen Verblendsystems mit dem Ceromer Targis. Quintessenz  Zahntech, 23, 457-470 (1997) übersetzt ins Spanische als: Evaluacion de la adhesion obtenida mediante un sistema innovador para el recubrimiento de pritesis con el ceromero Targis. Quintessence technica 9, 172-181 (1998).

Ludwig, K. : Laborwerkstoffe. In: Klinische Materialkunde. Hrs.: Meiners, H.,Lehmann, K.M., Hanser 1998.

Ludwig, K. : Suprastrukturen auf Implantaten. In: Titanimplantate und Metalle in der Mundhöhle, Quintessenz Zahntech, 24, 457-470 (1998).

Ludwig, K.: Was kann von einer modernen Kunststoffverblendung erwartet werden ? Material und Klinik Quintessenz Team-Journal 28, 321-327 (1998).

Ludwig, K., Dentallegierungen. In: Stemmann, H. (Hrsg.). Die richtige Abrechnung des Zahntechnikers. Spitta Balingen 1998

Ludwig, K. : Genauigkeit und Bruchfestigkeit von Ultralite-Folienkronen . Dental Spiegel-Labor 3(2),14-17 (1998).

Wagner, B., Kern, M.: Klinische Nachuntersuchung an partiellem Zahnersatz nach zehnjähriger Tragezeit. In: (Hrsg.): 122. Jahrestagung der Deutschen Gesellschaft für Zahn-, Mund- und Kieferheilkunde gemeinsam mit der Deutschen Gesellschaft für Zahnerhaltung, Bremen 1998, S. 45., DGZMK, Bremen, 15.-17. Oktober 1998

Witkowski, S., Schirra, C., Kern, M.: Konditionierung des periimplantären Weichgewebes mit prothetischen Hilfsmitteln. Quintessenz Zahntech 24, 986-1005 (1998).
 
 

Zurück zum Anfang


Letzte Änderung: Donnerstag, 26 Oktober, 2017